Clutch options.

Philm · #1 (**permalink**) 03-20-2006, 04:58 AM

Any recomendations for what type or where to go for a good clutch set up???

I will have a TKO 600, 157tooth billet steel flywheel and will use a Lakewood saftey bellhousing.

I would like to fit the hydraulic throw out bearing as the bell housing will not accomodate an external slave cylinder real easy.

Thanks

Phil

Leeroy · #2 (**permalink**) 03-27-2006, 04:07 PM

Philm

I think PhilN is a expert on clutches.

Good stuff Phil sounds like your getting ready for Wakefield.

Leeroy

Philm · #3 (**permalink**) 03-27-2006, 05:50 PM

HI Leeroy,
I was feeling a little cold there for a while.

I will chase Phil up.

Thanks

Phil

Beejay · #4 (**permalink**) 03-27-2006, 09:41 PM

Phil,

The high powered LS1 guys all seem to swear by the Textralia clutches, but I am not sure what they do for your set up.

I would probably ask Jeff over at GT, he seems to work on a lot of Ford engines, and seems to know his stuff when it comes to racing.

CAPA may be another one, as they supercharge Fords and must have experience in strong clutches.

Ben