LS1 Harness

[macloft]

Help Needed Again
For those guys who have installed the LS1 motor /Harness
I have a connector with no home. It is a 2 wire plug with a blue half cover (no rubber seal) the wires are red and black, and red and white. The Wires exit the main harness almost inline with the bell housing and would reach about the shifter position or (back the other way) the starter motor. What sensor does this little bugger attach to??.
Thanks

[macloft]

Found it. The plug goes to the throttle relaxer which I dont believe I have or need anyway. Does the LS1 Monaro 2004 have a throttle relaxer ?.There appears to be all the traction control circuit wiring in place but I dont intend using it.

[boxhead]

I dont have the wiring diagram here but yes the Monaro would have had a throttle relaxer (part of the traction control)

[sideshow]

just found that plug it goes to throttle actuator motor

themotor sits on drivers side inner gaurd around the strut tower sort off

this motor has throttlecable coming in from pedal then another throttle cable out goin to the throttle body butterfly

not needed for yr application