Shifter lever suggestions for a Tremec 3550

jams · #1 (**permalink**) 03-15-2002, 07:24 AM

Hi guys,

My tremec 3550 trans is in but I need a shifter lever. I know they come in all lengths and angles. Does anyone have any suggestions as to which one would fit the best and where to order them?

Thanks for your help.

wicked fast · #2 (**permalink**) 03-15-2002, 08:20 AM

jams,
FinishLine.
Check out the photo in my gallery of Enzo's shifter handle on my TKO.
Cheers,
Wicked Fast

BS12756 · #3 (**permalink**) 03-19-2002, 04:09 AM

I have the same problem, I might go to ford and get a stock one for a 93 or 94 mustang $60 let me know if you find anything better.

bsuttonmci@att.net

blubyu2 · #4 (**permalink**) 04-23-2002, 04:39 PM

i just went with the same setup and used a pro 5.0 works great

pbrown · #5 (**permalink**) 04-23-2002, 06:01 PM

blubyu2,

What shifter position did you use? I thought the rear position would be too far back for a standard shifter.

BS12756 · #6 (**permalink**) 04-23-2002, 07:05 PM

No make sure you use the standard furthermost position it will work just fine if you are using a small block ford.

bsuttonmci@att.net