Chrome Rollbar 4 sale

cslithergo · #1 (**permalink**) 09-07-2002, 04:00 AM

I have a B and B chrome rollbar if someone is interested. I will have to remove the mounts. I am going with the narrower (12 inch oc bend). Cost 150 + shipping (no handling cost

)
Thanks
Chris Adler

ps: reading your messages has helped me a great deal. I hope that I can return the favor in time.....

eagle1 · #2 (**permalink**) 09-07-2002, 06:43 AM

You have mail

cslithergo · #3 (**permalink**) 09-07-2002, 12:25 PM

I am having trouble posting a message with AOL at work but to answer your questions... The roll bar is bent on about a 15 inch center to center (B and B manf.), chrome, new. Now the hard Q: I think that the mounts will come off cleanly. They are a (3) 4" X 4" x 1/4" thick plates welded to the frame with a short tube welded on top that fits inside the roll bar tubes. I took a look at it last night and I think It will come off wth no problem. I will post a Picture around 8pm tonight when I get home....
Chris Adler
478-474-4389

cslithergo · #4 (**permalink**) 09-08-2002, 04:54 AM

here are some pics.....

cslithergo · #5 (**permalink**) 09-08-2002, 04:55 AM

i give....

cslithergo · #6 (**permalink**) 09-08-2002, 04:56 AM

wait it worked...

cslithergo · #7 (**permalink**) 09-08-2002, 04:58 AM

one more try.....

as you may can tell I am not good with computers...

cslithergo · #8 (**permalink**) 09-08-2002, 05:02 AM

last try i promise

cslithergo · #9 (**permalink**) 09-09-2002, 07:41 PM

To those that were/ are interested: I removed the tubes that go into the rollbar with no problems. The plates that they were welded to is another story. They did not want to be removed (B&B has one excellent welder). They should be very easy to fabricate. They are 4x4x1/4 and are welded directly to the frame with the tubes that go inside the roll bar welded to them. The pictures show the position. I will try and email those that have responed just in case you miss this post.
Thanks,
Chris