Wheels and tires(help)

Jim Werth · #2 (**permalink**) 07-07-2003, 06:53 PM

Give Bryan a call he will answer your questions. Do you know your frame number. Just wondering what number they are up to! Jim

Clois Harlan · #3 (**permalink**) 07-09-2003, 08:32 AM

Talked to Barry yesterday and he said Bryan is on vacation. Barry can tell you what you need to know but I think you need to stay a little closer to 4 1/2' backspace.

Clois

kajun · #4 (**permalink**) 07-09-2003, 02:06 PM

I'll check the frame number tonight and post tomorrow.

Kajun

fw209 · #5 (**permalink**) 07-10-2003, 04:06 PM

Hey go here and look at posts. I measured the actual openings. This may help you out a bit. If not well I tried.. Good Luck..
Fred

B&B Rims and Tires

cslithergo · #6 (**permalink**) 07-14-2003, 10:36 PM

Hey Kajun - I'm down in Macon and have a B&B also. Let me know if I can be of any help. Mine was/is a stage 3+. Its just about ready to hit the road.
Chris

kajun · #7 (**permalink**) 07-16-2003, 06:47 AM

Jim

lots of numbers on the frame, which ones are you looking for!

Slow Dawg · #8 (**permalink**) 07-16-2003, 07:18 PM

Hey D.G., OOPS, kajun! Jim is referring to the last 3 digits, unless you have a BX number. I think yers may be in the mid 270's.

Jim, I just punched out 284, 285, 286, and also one for a '34' today. I haven't done a BX # for a couple of months, so I can't say how far we are with them.

Ron

ps; kajun, if you want to know what all the #'s mean, just ask. I'll send you an e-mail explaining them.