GM Calipers for Mustang II conversion

OhBuoy · #1 (**permalink**) 05-22-2004, 05:41 PM

What year/make are the GM calipers that are used with the Mustang II adaptor brackets. The banjo bolts that I got from Heidt's with my stainless lines were the wrong size, and ended up pulling 3 threads from the inside! I want to replace them to try to get the car up for inspection. I can always order new ones online, but if I could get them locally, I might be able to get them in tommorow.

Tom

cobra427mnsi · #2 (**permalink**) 05-22-2004, 10:18 PM

Tom

The ones that I am using are 1970-1977 Camaro calipers. The brake pads require a 1/8" spacer on the back of them because the Grenada rotors are thinner than the Camaro ones that the calipers originally fit.

Paul

Slow Dawg · #3 (**permalink**) 05-23-2004, 07:38 AM

Tom, question. Did you get the calipers from us? I think they are from an S-10. You'll have to call Barry to find out what years. The banjo bolts we use are HELP #13936(?) and 13937(?). I know the last #'s are 36 and 37. The 37's are about 3 threads longer than the 36. Think maybe you got the shorter ones?
If this doesn't apply to your brakes, then in the immortal words of one Roseanne Roseannadanna, "Nevermind!"