BDR - Lower Radiator Hose

[my427]

I've got a 302 in my BDR and wanted to get another lower hose to have as a spare. On the water pump-side, the diameter is 1.75". It travels about 5" and then makes a 90 degree turn, another 5" and it connects to the 1.5" tubing.

I've picked up a molded hose from NAPA, but when I cut it to the right length, I lose the larger size.

Does anyone know the correct part numbers to ask for?

Thanks

[Secret Squirrel]

I am using NAPA NBH-7344.
It is 1.75" near the elbow and 1.5" on the long end. You can cut to fit.

My lower SS pipe is cut back a few inches and it is 1.5" dia. now. Before the end was cut off there was a 1.75" flair.

[Rwillia4]

Cutting the flair on the upper hose might be OK but don't cut the top on off, it will end up spitting water out no matter how tight you get the clamp or even doubled up. trust me