Brake Pedal spacing from gas pedal

[xena2006]

Has anyone modified the brake and clutch pedal to move both a bit more away from the gas pedal? Looking at the mounting. it looks as though offset tabs from center would help.

[Mac VABCH]

You can heat and bend the pedal arms fairly easily, I did this to mine only get you about 1/2 in though...Mac

[xena2006]

I took this photo which shows how the prdals are mounted. I was thinking about fabricating a set in which they were off center. This would move pedals about a 3/4".

[JBCOBRA]

Can you "Heel Toe" the car now?

[Bill Bess]

Ya, "Heel & toe" and pointy driving shoes will help. My feet are like trained dogs, they rarely miss the right pedal.
Harrrr!

[Cashburn]

You can mount existing pedal so it is left or right of the pedal shaft (not centered). That's a quick way.

[JBCOBRA]

You can't really drive these cars without it

[xena2006]

Cashburn, My concern about mounting the pedals as you suggested would not allow tab touching the shaft to be tight enough. With the 2 tabs you are pulling them together against it. If one has wide feet, the stock arrangement of the pedals is not good. Ron