Electrical issues

[MISFIT 1]

I may have to order one, 1 key would be nice

[cycleguy55]

Originally Posted by FlyingGumby

Didn’t like the fit of a recently installed Lucas ignition switch made for a 3/4” hole. Searched for a new switch by shape and size of the original key thinking it could be cut to fit an existing locking gas cap.

Found this one for $10…

Fits dash perfectly and the key worked with locking gas cap unmodified.

If that key worked in your gas cap unmodified, does that not imply the key is somewhat generic, therefore indicating anyone with a similar generic key could use it in your ignition? I hope you have another form of security, should you ever need to leave it unattended.

[FlyingGumby]

My original key opens the gas cap but does not turn the new ignition switch. I suspect a cap will open with any key that fits the slot but only a specifically cut key will turn the switch. A bigger issue is the exposed wires behind the switch that could not be easier to hot wire. Other safety measures are needed.

[twobjshelbys]

Originally Posted by FlyingGumby

My original key opens the gas cap but does not turn the new ignition switch. I suspect a cap will open with any key that fits the slot but only a specifically cut key will turn the switch. A bigger issue is the exposed wires behind the switch that could not be easier to hot wire. Other safety measures are needed.

Anti theft and cobra are mutually exclusive. There probably isn't an easier car to hotwire. Remember it's a race car

[FlyingGumby]

Problem solved.

Yes it’s a joke but I do use it on my El Camino!

[BDR0572]

Originally Posted by twobjshelbys

Anti theft and cobra are mutually exclusive. There probably isn't an easier car to hotwire. Remember it's a race car

It is called a stick shift

[BDR0572]

I'm never to far away from her ,but if I am I always flip the electrical cutoff key and carry it with me . they will have to push or tow it away .