Moto-Lita steering wheel on BD?

bignoze · #1 (**permalink**) 06-06-2005, 08:26 AM

Which one to get? and What did you have to do to install it? Do you need any other parts for the wheel install?

TIA,

Bignoze

Cashburn · #2 (**permalink**) 06-06-2005, 11:34 AM

Get the smaller one so you don't ruin your room at the thigh. You simply redrill it for the BDR pattern.

bignoze · #3 (**permalink**) 06-06-2005, 11:54 AM

Cash,

The 6 bolt 14' ????? Then do you have to redrill the all the holes?

Cashburn · #4 (**permalink**) 06-06-2005, 03:35 PM

Redrill all.

tfarhood · #5 (**permalink**) 06-06-2005, 08:01 PM

I used the 15" 6 bolt pattern. I don't think the 15" is too big that it takes up thigh room. The BDR wheel is 13" (even though Reg told me it is 14"). I wanted to maximize the wheel size for leverage. My car is very easy to turn compared to the original wheel.
You do have to re-drill 6 new holes and tap them. It is not hard if you have a drill press available. You could do it with a hand drill, but not as easily. There is plenty of room in the steering hub for the new holes.