Rubber side pipe hangers for a BDR

[spdbrake]

Much like the pic in my earlier post above. I left it barely snug as to not restrict the vibration and torquing movements it gets subjected to but to reinforce only.

[Kobura]

I use hose clamps on mine, also. However, I did this after the metal tangs on both mufflers broke from fatigue vibration stress and noticed that the rubber grommets were about to tear loose. I had the metal muffler tangs repaired with reinforcement pieces welded at the mufflers. OK so far after about 5k miles.

[jimbo01]

I talked with AP exhaust products. The AP part #8511 is the same as Backdraft uses. I ordered 4 from summit. They called AP Exhaust Products and had them drop shipped to me as they don't sell retail. They are really cheap. Summit part # 8511 is not correct in their catalog.

[jimbo01]

The AP Products part # 8511 is the same as Backdraft.

[jimbo01]

Originally Posted by Cashburn

I ordered the hangers based on the make/model you used from rockauto and got something completely different. So be careful on who you order from since there are some varieties to the parts sold for this application.

I got 4 of the correct rubber hangers from summitt. They had them drop shipped from AP Exhaust Products. The part # from AP #8511 is the correct number.