Chassis Inspection Day / Dyno Day

[RodKnock]

Originally Posted by Got the Bug

Like Scott, I'll show up and watch/cheer from the peanut gallery. You should install some portable grandstands.

I'm going wait until my engine warranty is over in July to do any tweaking.

Who's buying lunch?

Doug, wouldn't make more sense to do the dyno tune while it's under the Roush warranty? That way, if it breaks, which it won't, you would have the warranty available.
'
I would really love to do it, but I'm "yella" when it comes to drilling holes in things, especially the pipes. If I can get there, then I'll be there to watch.

I heard there's a free BBQ.

[scootter]

Rodney,

I put the bungs in my side pipes. You can't even tell unless I point them out. Just pull the pipes off, slap them on the table, drill some big holes in them, then weld the bungs in. No problem.

Scott

[RodKnock]

Originally Posted by scootter

Rodney,

I put the bungs in my side pipes. You can't even tell unless I point them out. Just pull the pipes off, slap them on the table, drill some big holes in them, then weld the bungs in. No problem.

Scott

Besides pulling the pipes off, slapping them on table, drilling big holes in them, welding the bungs in and slapping the pipes back on, the whole thing sounds stress free.

[PANAVIA]

We can use my car or chucks car as a "this is what you can do" on a bung weld.

or put scooters in the air and review.

as it gets closer to the date we will need to firm up slots and such.

also we will see if our computer tuner will be there as I need my chip reburned for my 5.3L / A9L setup. I need to upgrade injectors and retune as I feel like I run out of fuel at 4500/5000 RPM.

191miles on car - 3 of them in the rain.

Steve

[Greg tripp]

Originally Posted by scootter

Rodney,

I put the bungs in my side pipes. You can't even tell unless I point them out. Just pull the pipes off, slap them on the table, drill some big holes in them, then weld the bungs in. No problem.

Scott

That's what I did!!!

[scootter]

Not sure if I would want you to put mine in the air. I don't clean the bottom of my car. I figure the oil will keep things from rusting!!!

Scott

[PANAVIA]

All are welcome. -- Merry Christmas everyone!

[RodKnock]

Steve, how late do you think you'll go that day?

I assume rain will "wash out" the day for everyone?

[PANAVIA]

Worse Problem. -- our dyno tech was working on his house over the Xmas holiday and has blown out his knee.

we are grounded for dynos for a bit.

[vanoochka]

Originally Posted by PANAVIA

Worse Problem. -- our dyno tech was working on his house over the Xmas holiday and has blown out his knee.

we are grounded for dynos for a bit.

Bummer for him (and me).

I decided to trash my Edelbrock POS and yesterday installed a Holley double pumper, so I was going to give it a go.

[PANAVIA]

I will be at the Ranch Saturday , and you are all invited to come by for a look see.

I will be there from 10-to-4PM

you can check out my reverse lights!

we will schedule a dyno day for 1-10 or 1-16. we have some late model stuff to do as well, we have a Cobra R mustang we just got done with and a 2003 SVT Cobra.

Steve

[vanoochka]

Originally Posted by PANAVIA

we will schedule a dyno day for 1-10 or 1-16.

Sorry this didn't work out, as I would prefer to give you the business. I'm heading back to the east coast on the 7th, so need to have it done next week.