WTB Carpet set CR 94" wheel base

HPCOBRA · #1 (**permalink**) 11-22-2009, 07:51 PM

Looking for a carpet set for a 94" Wheel base Classic/Roadster Cobra
Thanks

Hray · #2 (**permalink**) 11-22-2009, 10:05 PM

where are you located, I have two brandnew sets, but I have two cars for them, however if you are close enough you could drop by and make patterns of them.

Ray

HPCOBRA · #3 (**permalink**) 11-22-2009, 10:09 PM

Thanks for the reply.. I am in upstate NY. Where did you get them ?

Hray · #4 (**permalink**) 11-22-2009, 10:38 PM

They came with the two cars I purchased a couple of years back.

You are most likely going to have to make something from scratch. I doubt anyone will have a set for these cars.

My best guess would be to check with Bill emerson in redding Ca. He is still building cars that are nearly exactly the same. if any one knows of a kit he most likely will.

Ray

HPCOBRA · #5 (**permalink**) 11-23-2009, 06:29 AM

I could not find a number for him. If you have one could you send it to me via personal message..
Thanks for your help

tcrist · #6 (**permalink**) 11-23-2009, 06:38 AM

HPCOBRA,
You can find them at www.beyondcobra.com

Terry

Double Venom · #7 (**permalink**) 11-23-2009, 10:52 AM

Ah-Hemm,

Shame on you guys

!

I DO have a complete, factory sewn set for CR's (94" WB-Is there any other size? - Nope!)

Black in color, With the OEM padding!

All you had to do was ask

SURprise-SURprise, SURprise Sgt. ............... (????)

DV

Hray · #8 (**permalink**) 11-23-2009, 11:27 AM

Hey DV; we stand corrected and enlightened, so what else you got tucked away in those cubbies that we might be able to use.

Now I know you have roll bars, and carpet. What about a new modern uptodate assembly manual...... (sorry could not resist.).

byeeeeeeeeeeeeeeeee

HPCOBRA · #9 (**permalink**) 11-23-2009, 05:40 PM

I am new to this car and did not know that CR only offered a 94" WB chassis. Someone told me that there were two models!!! My mistake. I just sent a PM to Double Venom. Please get back to me.
Thanks

Double Venom · #10 (**permalink**) 11-23-2009, 06:24 PM

The ONLY KIT COBRA in the World that came with a Certified FORD warranty on the drive trains, Viper V-10 488 C.U. engines with T-6 tranny's, Hydraulic /electrical tilt front ends, four to six inch longer passenger compartments, fitting 17" low profile tires, electric doors, ignitions systems, GPS, every anti theft device known to Cobras, total upgraded racing suspension to the ultimate braking systems, solid axles to full independents, custom dashes up to 18 individual gauges, remote radios, remote controlled doors, nose, trunk lids, patented AND C.A.R.B certified EPA Certified sidepipes, winner of "THE" "Dupont Paint Top Gun Award!, etc., etc. etc .............

AND YOU WANT A MANUAL!!!!!!!!!!!!!!!!!!!! What's one guy supposed to do?!

Where "We've -gone- "Who Needs A MANUAL? (SO SAYETH THE BOSS, AKA THE WIFE!)

DV

Curt C. · #11 (**permalink**) 11-25-2009, 02:54 PM

I have a brand new red carpet set if anyone is interested.

tcrist · #12 (**permalink**) 11-25-2009, 04:58 PM

Hay Curt,
I never did ask you, is your carpet set trimmed to fit or is it oversized directly from CR?

Curt C. · #13 (**permalink**) 11-25-2009, 08:20 PM

Terry,

Came directly from CR. I assume it is the oversized version but cannot be 100%.

Double Venom · #14 (**permalink**) 11-26-2009, 03:41 AM

Interesting comment!

I never knew CR's had more than one style/set of carpeting for the Cobras? The Tunnel carpeting certainly could have fit a little better!

Oversized??? Something Don slipped by me?

DV

tcrist · #15 (**permalink**) 11-26-2009, 09:38 AM

DV.
The carpet is oversized so you can install it in different configurations as far as I can tell anyway. The edges that require it already has the bindings on them.
Is your carpet precut to fit?

Double Venom · #16 (**permalink**) 11-28-2009, 04:00 AM

The Mud is starting to settle!

There is NO 'cut to fit' carpeting, oversized or not!
I think what you guys are seeing / talking about are the "Floor" pieces that go down first!

These are considered the "Bottom" pieces and go on / in first. What I am assuming, you guys are cutting these to fit? Well they are long-wide made enough to start up the sides of the floor pans/frame rails. Then the top pieces go in with the binding showing, lapping over the floor pieces.

This way their is no possible gap now or when/if the carpet shrinks later on!
Make sense or have I got this all wrong!?
DV

tcrist · #17 (**permalink**) 11-28-2009, 10:37 AM

Good morning DV,
What we are talking about is the actuall carpet. The one that Wetdog has (2007 ? version) is oversized. I borrowed his to have my carpet made. I had went to Hrays and traced out his set (actually my girlfriend did most of the tracing). But I got frustrated with that and borrowed Wetdogs. I am not sure of Curts as I have not actually seen his. My guess is that it is oversized also.

Double Venom · #18 (**permalink**) 11-28-2009, 02:58 PM

OK,
Don had to do something when he finally made the new floor pans! At first he tried or at least just assumed or hoped the original carpeting would fit...It didn't! He then had to have the carpet re-made with the newer designs.

Now we've got guys with the old floor pans (which is the original cut carpeting)and the newer carpeting pieces getting all mixed up, There-for we now have cut/not to cut syndrome!

Ray's should be the original pattern(s) from the late 70's
.
DV

Krewton · #19 (**permalink**) 11-29-2009, 04:21 PM

I'm interested in a brand new set of Black Carpet if anyone still has one. Please email me at levingsk@aol.com

Thanks
Kenton

Hray · #20 (**permalink**) 11-29-2009, 08:43 PM

Kenton: I am going to assume that whey you remade all your foot boxes, floor pans, dropped the seats, remade the tunnel etc... that the likely hood of an original set fitting your car is not too likely. Just my guess, you may have to bite the bullet and take it to a good trim shop.

Ray