Radiator

jersey427owner · #1 (**permalink**) 09-17-2010, 02:05 PM

Anyone know of a radiator that will fit a CR and has lower outlet on driver side? The one I got with my kit has Chevy setup even though I ordered kit for a Ford small block. I'm trying to set up with passenger side inlet water pump from an early Bronco but now my pump mounting bolts and alternator bracket won't work.

rustyBob · #2 (**permalink**) 09-17-2010, 06:42 PM

Is it an aluminum or brass/copper radiator ???
maybe you could just take it to a local shop and have them change it for you.....
and have them check to make sure its not a dual pass radiator....

onetrackrider · #3 (**permalink**) 09-18-2010, 09:41 PM

I picked one up from speadwaymotors.com, had to do some fancy hose work but it works well. I have pic's if interested.
matt

bobcowan · #4 (**permalink**) 09-18-2010, 10:30 PM

Takes yours to a radiayoer or welding shop and have a new outlet welded in, and the old on closed off. It's a pretty simple procedure. Probably a lot cheaper than buying a new radiater.

onetrackrider · #5 (**permalink**) 09-19-2010, 11:26 AM

Here's the part #

FORD/MOPAR TRU-KOOL RADIATOR
Item #: 917348

cost 139.99 + shipping 24" wide x 19" tall
Works great with my 302 ford motor.

JEwalt · #6 (**permalink**) 09-20-2010, 12:43 PM

Are there any issues concerning the mounting of the 19" high radiator and clearance of the hood hinge?
(I have the 26" x 19" Griffin)
Jeff.