Rear coilover fitment

[G_Edmonds]

The legs of my full width roll bar are in the way for the top mount of a rear coilover. Surely someone has figured out how to mount them and any help would be appreciated.
Thanks
Greg

[Roylerumble]

interesting. like to see pics of the mounting of your bar. Have you considered upgrading the rears to coil overs. It's pretty easy and not overly expensive.

[MaSnaka]

G there are pictures in my gallery that will show you what I did to securely install rear coil overs. I was not comfortable with the single shear mount from CR so I improved it by a lot. I had no interference with the roll bar leg. I hope my pics help. Maybe a mod to the roll bar is necessary. Good luck!!

John

[G_Edmonds]

MaSnaka after looking at your pictures (Which I’ve done many times before) I think the coilovers will fit if the upper bracket is just right. I’ve seen some online that might fill the bill but I need to find some dimensions. If not I’ll just build what I need.

G

[Roylerumble]

This forum is so glitchy to post pics on. If you pm me I'll text or email photos of my set up for you to see the coil over I and others did. It's all parts off the shelf and very little modifications to make it work.