DV...Need a part number.

Snake · #1 (**permalink**) 08-14-2002, 09:06 PM

Hey DV! I need a NAPA part number for the OEM 160 to 180 screw in switch...so I can hook up the CR fan...is there anything else I will need?
Thanks.
Snake.

Snake · #2 (**permalink**) 08-16-2002, 12:51 AM

Does anybody know the NAPA part number for a OEM 160 to 180 screw in switch...so I can hook up the CR fan...!
Thanks.
Snake.

dscott · #3 (**permalink**) 08-16-2002, 08:16 AM

I don't use the NAPA part but I probably would if DV gets off his butt (I wish I was rich and famous like him) and answers. I use the sender from Spal, they come in 180 or 195.
Don

Double Venom · #4 (**permalink**) 08-16-2002, 10:10 AM

Geeesh...no rest for the worn out!

Shop records and computer are at two different locations, I checked on the number then forgot to bring it home! Sorry.

Forget NAPA, can't find that number. Go to JEGS - 1-800-345-4545

Hypertech Switch 533-14026 On @ 176 off at 166 F
533-4028 on @ 200 Off at 185 F

Both are $43.99 and come with the proper connector. I believe they both use a 1/2 pipe thread..almost always will screw right in to an aftermarket intake.

There...damn it! Now while I'm off my back side, what's next?

DV...I'm out of cookies and grumpy!

Snake · #5 (**permalink**) 08-16-2002, 11:02 AM

Thanks Guy's!! What's next....My Tach doesn't seem to want to work...go figure...What is the right way to hook this thing up...it's an electrical tach...and my wire harness is the CR Chevy harness. Do you guy's use the gas shocks for the hood and deck lid...if so what is the right one for the CR Cobra. Is there a good tight woven wire mesh for the nose, to protech the rad from bugs, and small bits of crap. That you can buy?
Thanks Guy's.
Snake.