Don Scott :question about FE motor mount

cobra427mnsi · #1 (**permalink**) 06-07-2004, 05:16 PM

Hi don

I am changing FE motors. The block that I am removing has 4 motor mount holes. The motor mount (see pic) for this block is for the two mount holes that are spaced 4" apart. The new block has only the two holes for mounting that are spaced 2 1/2" apart there are no 4" holes as in the old block. I need a motor mount similar to the one pictured but that have holes 2 1/2" apart. Do you know of a part number for this mount?

cobra427mnsi · #2 (**permalink**) 06-07-2004, 05:20 PM

Picture of old block

cobra427mnsi · #3 (**permalink**) 06-07-2004, 05:22 PM

Sorry for all the posts but I was unable to attach all the pics in one post.

dscott · #4 (**permalink**) 06-08-2004, 08:45 AM

I haven't seen a block with only the 2 mounting holes. Is this a marine block? The mount you have is the one we use on all FE's so I don't know what you can use. You'll need to look through a mount book to try and come up with something that fits. Sorry I can't help but like I said I've never seen that block before.
Don

cobra427mnsi · #5 (**permalink**) 06-09-2004, 03:10 PM

Thanks Don, I will ask over at FordFe.com. Maybe someone over ther will know a part number.

Paul