Front Brake Hose

dpmtrspts · #1 (**permalink**) 05-31-2005, 05:45 AM

I'm a first time builder, building a kit I purchased from a friend. I have run into a problem with the front brake hoses. I have the GM caliper kit, but the metal sleeve on the brake hose hits the front coil spring. Has anyone had this problem and if so how can I go about fixing it?

Thanks in advance for any help!

dscott · #2 (**permalink**) 05-31-2005, 01:33 PM

The brake hose you need does not have a metal sleeve. You will need the hose from a mid 80's GM metric caliper. It sounds like the hose you have is for the Mustang II caliper.
Don