zirgo fan attachment

tcrist · #1 (**permalink**) 10-17-2007, 08:31 PM

I bought a Griffin radiator setup from CRII. It came with the Zirgo fan. It did not come with any brackets to mount the fan to the car other than the plastic slide in pieces for the fan. Is anyone using the same setup? Any pictures on how you mounted the fan? Any ideas?

Thanks in advance.

Terry

dscott · #2 (**permalink**) 10-18-2007, 09:30 AM

Terry, position the fan as low as you can on the radiator for hood hinge clearance. You can use the plastic mounts by attaching them to the top and bottom rail on the radiator. Just drill 4 small holes and use machine screws and nuts. You can trim the plastic mounts to fit since they have multiple holes for mounting.
Don

tcrist · #3 (**permalink**) 10-18-2007, 10:01 AM

Thanks Don. I had the fan turned 90 deg the wrong way. The tabs were horizontal not vertical. Will check it out tonight.

Thanks again,

Terry