5" LaMans fuel cap and spillage well (NEEDED)

capteddie · #1 (**permalink**) 02-23-2008, 09:11 AM

Anybody know where I can get a 5" LaMans-style fuel cap and the spillage well? I can probably get by without the well. I can have my body guy make one if I have to.

Thanks,

Ed

trctrdrvr · #2 (**permalink**) 02-23-2008, 10:21 AM

try this

Finish Line Accessories

mickmate · #3 (**permalink**) 02-23-2008, 11:41 AM

I have dimensions for the well, PM me if you need them.

capteddie · #4 (**permalink**) 02-23-2008, 01:25 PM

Thanks guys!!!

Mickmate...PM on the way

Ed

capteddie · #5 (**permalink**) 02-23-2008, 03:20 PM

Ok...

Just talked to my body guy and he said making a spillage well without a mold or something to go off of would be pricey.

Does anybody sell the small 3.5" cap with the spillage well?

Thanks,

Ed

mickmate · #6 (**permalink**) 02-23-2008, 07:26 PM

OK I have an embarrasing scribble with accurate dimensions that I will redraw. In the meantime lets be innovative hot rodders and start looking for pans that taper out instead of straight up sides and have a 6" diameter base. I'm actually going to cut mine out of the body (gasp!) as I'm building a street car. I was thinking of pulling a mold off it and it looks like it might be helpful to a few of yous fellas.

Double Venom · #7 (**permalink**) 03-07-2008, 10:46 AM

Still a problem?
If anyone has one I can borrow for three days I will make a clay mould and fiberglass one up for cpteddie. No damage will be done and I will immediately return mail it.
DV

capteddie · #8 (**permalink**) 03-07-2008, 11:27 AM

Thanks DV...

I actually have 2 now. 1 from CRII and 1 from Jeff Classic down in AZ. Jeff's looks better than the one from CRII, so I'm going to have my body guy work that one into the fender.

Ed

Quote:

Originally Posted by Double Venom

Still a problem?
If anyone has one I can borrow for three days I will make a clay mould and fiberglass one up for cpteddie. No damage will be done and I will immediately return mail it.
DV

mickmate · #9 (**permalink**) 03-09-2008, 08:48 PM

I put a dimensioned drawing in my gallery. If you can't read it let me know.

rbray · #10 (**permalink**) 03-09-2008, 09:23 PM

I fabricated my own out of aluminum in my English wheel.

If you can make me some type of pattern, maybe I can make one for you

http://picasaweb.google.com/rbrayzz/...73145506646210

G_Edmonds · #11 (**permalink**) 04-09-2008, 02:18 AM

Capteddie,

Do you still have the extra spillage well, and if so would you be willing to part with it? That's the only thing I have ordered from CRII that I can't source elsewhere.
Thanks,

Greg