big block chevy sidepipe hedders

[jerome morello]

need to locate a set of big block chevy hedders, thanks jerry

[vettestr]

Hello Jerry,
To answer your question spot on I will need a little more information. If you are looking for headers that fit a standard bolt pattern of BBC heads and want them in sidepipe configuration I can help. Try Jegs or Summit for 1970 Corvette headers and sidepipe exhaust made by Hooker. http://www.jegs.com/p/Hooker/Hooker-...53672/10002/-1

[Tim Brewer]

For what vehicle? If for a Cobra, just install the engine and have the hedders custom made, you're probably not going to find any hedders that will fit your chassis.

[Double Venom]

Tim is spot on, unless you find some one with a CR's with a Chevy BB, the chances of finding headers for it THAT FIT CR,s is going to be nil to -0. I of course could be wrong but it would be a rare bird.

Without a JIG or blueprints the fabricator is going to need your frame with the body mounted, the side-pipes, and most likely the engine in the frame.

There is one guy that I know of that may be able to help you, (Jeff- in Ohio. A CR's builder and fabricator does make headers) his number is 419-919-2277

HINT: Don't forget to tell who ever fabs them up for you the left front tube (#2 cylinder) has to extend out farther from the rest, so the steering shaft has enough room to pass through the headers.

If you were closer I'd make them for you.

DV