Midstates 427 Cobra partially finished roller For Sale

[COBRA406]

I have a partially finished roller with engine/trans installed, about
75% complete. Car is a roller with suspension, brakes, fuel tank
and lines run and fitted. Features include:

ľ Mustang II tubular front suspension with GM metric calibers, poly rack and suspension bushings.

ľ Completely rebuilt or new parts. 9" Lincoln Versailles rear with 3:50 posi unit rebuilt.

ľ Carrera front coilovers and Aldan rear coilovers completely adjustable front and back.

ľ 400 Ford Cleveland based M block completely rebuilt and balanced.

ľ .030 over on block with Speedpro forged pistons with moly rings.

ľ Crank.010/.010 with peened rods with ARP bolts.

ľ Ford Motorsports cam 536 lift, 290 duration with Rhodes lifters.

ľ 1970 351C 4V closed chambered heads with stainless 2.19 int and 1.71 exh valves with 3 angle valve job and Crane double springs and retainers.

ľ Crane roller lifters and stud kit.

ľ New heat treated pushrods with guideplates.

ľ Motorsports valve covers.

ľ Aluminum hi volume water pump.

ľ Included are a new Mallory Unilite distributor and controller and coil.

ľ 8MM wires.

ľ Resurfaced flywheel with new starter gear.

ľ Gear reduction starter and 140A alternator.

ľ Centerforce clutch and pp.

ľ Lakewood scattershield.

ľ Image wheels and BFG's mounted and on car.

ľ Completely rebuilt toploader with Hurst shifter and reversed original style shifter.

ľ New driveshaft with yokes and new joints. Balanced, not installed.

ľ Body mounted with doors, hood, trunk and windshield installed.

ľ All latches included but not installed.

ľ Lucas light package installed. Wiring harness installed and run to locations. Ron Francis harness and instructions.

ľ Dash and Ididit column installed.

ľ Borgeson steering joints.

ľ Complete interior with seats included but not installed.

ľ Roll bar installed.

ľ All appropriate hardware included.

ľ Heater mounted under dash.

ľ Lucas wipers installed; not wired.

ľ All parts including ceramic coated side pipes/headers included.

This car was purchased by me from Bob Kallio at Midstates in 1994. I have
lost my third garage stall with this move and don't have the space or time to
finish. Car is in indoor storage.

Price: $17,500 firm. Car has been thoroughly researched and only the best components included.
970-292-8086 home
970-566-0311 cell
Questions: cobrabobby@comcast.net

[FUNFER2]

Sounds like a great buy for someone. I live 50 miles from them, good people & very nice kit. You might add what's needed to finish & some photo's. Too bad you have to sell.

[COBRA406]

Thanks Funfer,
Tried to post photos but gave up. Will try again tonight. Forgot to mention
we moved to Colorado this last month and car is in Loveland, CO. As far as
what is needed to finish, the car is trial fit assembled and would recommend
disassembly for paint and body work. Engine is dry and has Eastwood descecant
storage plugs subbing for sparkplugs to keep it dry. Included is an extra set of
engine gaskets if buyer wanted to reassemble for peace of mind. Needs to be
finished wired, hydraulics bled, all lubricants installed including remote oil cooler.
The Griffin radiator is out for install of Cooling Components puller fan and shroud
and needs to be reinstalled with fitted radiator hoses (ss). Probably a good months
work and should be ready for the road (without paint).
Bob T.

[FUNFER2]

You could send the pics to me and I'll try to post them. I may be interested. I sent you a PM with my phone #
Kevin

cobrakev@galaxycable.net

[StreetSnake]

I also live in Ohio and would be interested in seeing some pics. I emailed you with my info, when you get an oppritunity get with me. Thanks

[COBRA406]

Streetsnake,
Thanks for the inquiry. Just moved last month to Colorado and that's
where the car is now. Haven't updated my profile. Sorry. Please send
me your email addy and I shoot you some pics if you are still interested.
Bob T.

[COBRA406]

Would also consider a trade for a Mini Cooper S, new generation (BMW)
of equal value.