Driveshaft safety loop

Shelboss · #1 (**permalink**) 11-15-2007, 08:29 AM

Does anyone have a picture of their driveshaft safety loop and the cross member that the seat beats attach to in their forum? My early frame came with a universal safety loop that I am replacing. I don't know whether that cross member is flat stock or angle from the pictures I have, thanks
Art

1985 CCX · #2 (**permalink**) 11-15-2007, 06:18 PM

Art

I installed the Summit NHRA loop last winter, it is powder coated and very nicely done.

The seat bolts in my car go through the outrigger off the frame. I do have seat tracks so that might allow for positioning further back since the seat is a bit forward. The front bolts use a large SS washer ~2" diameter through the floor panel itself.

Shelboss · #3 (**permalink**) 11-18-2007, 08:49 PM

Jeff, what do the inner seat belt bolts and the driveshaft loop attach to? That is the piece I am looking to duplicate, thanks
Art

scootter · #4 (**permalink**) 11-18-2007, 09:54 PM

I have a pic of my saftey loop. I modified the stock one.
Scott

1985 CCX · #5 (**permalink**) 11-20-2007, 08:46 AM

Art,

I can't download anymore pics YIKES!
They attach through the body with large 2" diameter SS body washers. I will have the car up in a week or so and will take pictures and email direct since the downlaod is frugal.

Shelboss · #6 (**permalink**) 11-20-2007, 08:57 AM

Or you and Dave could take one more run if the weather cooperates this weekend, I am south of you and will have the jack and the drinks ready

1985 CCX · #7 (**permalink**) 11-22-2007, 08:58 AM

I would but I am in NC.......vacation