![]() |
Coupe Body Make...
3 Attachment(s)
Would anyone know who makes this Coupe Body ??
Haven't seen any manufacturer with this shape and I'm looking for a glass body. Any leads would be much appreciated. (edit) It is not... An FFR, R&D/Highlands/ShellValley, Superformance, Contemporary/Lesher, NAF or Mr. Bruce.. Would love to see a nicely finished Bruce car though... Thank you for your help ! ! ! Mike. |
looks like Factory 5 to me but not sure , there is a company in germany i think make one will try to find web address if i can and re post regards Sam
|
not one of mine, but it sure does look like Bill K's car down in Fla, that he built from scratch
|
Quote:
|
Would love to see a nicely finished Bruce car though...
Check with Goins Motor Cars, they are mounting one of my bodys on a JBL frame
|
Only two cars have been built with that body, both are carbon fiber composite bodies. They are as close to CSX-2286 as I could have made them. They use orginial windshields and have rear brake ducts that function. Also, a major difference is when the engine bay is shown, the firewall is back under the front cowl as in the orginial. The one pictured has the orginial wind deflectors on the windshield. I am not sure I will finish the second car with them or not. They also have the rear mud deflectors. One point that always shows a glass body is that most builders have the door, not form the rear wheel arch. Look at a Shell Valley, see the door comes about an inch short of the wheel arch. This makes the mold building a lot easier by tying in the lower side pieces into the body. In some cases the muffler area is also formed with thwe lower side pieces. Again this is the easy way to build a fiberglass body. The orginal cars have were made from many individual pieces. This car has about 46 models for all the pieces., and uses Corvette suspension.
Bill K |
Mike
Lesher is Contemporary, they bought the molds. |
All times are GMT -7. The time now is 09:14 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: