Buddy Bar valve cover

oilerfish · #1 (**permalink**) 03-18-2023, 05:09 PM

Found and bought for a song a set of Buddybar valve covers.

Name: thumbnail_IMG_8708.jpg
Views: 276
Size: 96.6 KB

They cleaned up pretty well with vapor blasting and happy with the look ( That air filter will find another home..).

Name: thumbnail_IMG_8755.jpg
Views: 281
Size: 96.8 KB

Name: thumbnail_IMG_8755.jpg
Views: 281
Size: 96.8 KB

However, someone has removed the steel tube in the oil fill side and the internal baffles from both. Thinking about filling the oil fill
hole -1 3/8" - with a Granatelli Motor Sports Valve Cover Baffle, part # 451000, this has an id of 1" so can get a breather to fit that.
That would cover the oil fill side but what do I use on the PCV side to stop oil from being sucked into the PCV valve? Id of PCV side is 1".

Name: thumbnail_IMG_8710.jpg
Views: 276
Size: 96.7 KB

Name: thumbnail_IMG_8710.jpg
Views: 276
Size: 96.7 KB

Blas · #2 (**permalink**) 03-18-2023, 07:38 PM

I see 2 sets on eBay. Both appear to have the internal baffles removed. Probably had rockers interfering so off they came. Probably had the longer necks added to the breathers caps.
Blas

LMH · #3 (**permalink**) 03-18-2023, 09:50 PM

In original configuration, the PCV valve goes on the left side of the engine and the oil fill/breather on the right.
Larry