Hey Bob!

ERA Chas · #1 (**permalink**) 03-22-2005, 05:40 PM

What is the minimum rotor thickness for the Wilwood front optional brakes. Mine now spec 1.240".
I've removed the calipers for maintenance and to install the Wilwood anti-rattle kit, but have not removed the rotors.
I can just barely see " 1160" cast onto the backside of a rotor mount boss, which bolts to the hat.
Is that it?
Thanks as always,

ERA Chas · #2 (**permalink**) 03-24-2005, 07:56 AM

strictlypersonl · #3 (**permalink**) 03-24-2005, 09:51 AM

I can't find any official numbers. I personally would only cut a maximum of 0.020" from each side for the track, 0.030" for the street before I replaced the rotor.