Lost thread on ERA SSBC brakes?

ERA 626 · #1 (**permalink**) 03-04-2006, 07:49 PM

I looks like the threads were lost form 8-2005 to 2-2006 Who was it who recently installed SSBC on an ERA? what is the part #? and how did they work.
The reason I ask I just am not happy with the performance with the stock 1 piston GM brake calipers and I would like to upgrade...

Loadco · #2 (**permalink**) 03-05-2006, 05:36 AM

SSBC P/N A185-S. Due to the weather I have not driven the car yet so I can't comment on performance.

REDSC400 · #3 (**permalink**) 03-05-2006, 06:13 AM

I am the one who started that thread a while back. They installed very easily. Mine were ordered in powdercoated blue and they look good as well. The car is still up on jackstands as we have plenty of snow and salt on the roads at this time (March 3, 2006) so I suspect I will be able to get out on the roads near the end of the month or early April for sure.

I have "before" stopping data with the standard GM brakes from 60-0 so I will be able to do a pretty good comparison after I break and bed in the new pads. What I plan on doing is running some hard (8 of each) 30-0 and 60-30 bed in stops and slows with ample time for the calipers to cool.

ERA 626 · #4 (**permalink**) 03-05-2006, 11:59 AM

Summit sells these for $389 clear anodized how much more for the blue?
http://store.summitracing.com/defaul...=egnsearch.asp

ERA 626 · #5 (**permalink**) 03-06-2006, 01:36 PM

I placed the order with summitt today. The Blue Powder Coated is $479

But I think it will be a worth while investment.

ERA 626 · #6 (**permalink**) 04-11-2006, 06:55 PM

I installed the new SSBC calipers today, they installed easy in about an hour.
It is raining in nor cal now

I will post my results...when it stops raining.

Before

After

ack fia · #7 (**permalink**) 04-11-2006, 07:02 PM

I noticed that the stock Camero brakes used on the ERA cars have a thin metal backing plate (pictures above). Would it be advisable to remove it for better brake cooling ? The plate covers most of the inside of the rotor and it looks like it would trap a lot of heat.
Comments!:

ERA 626 · #8 (**permalink**) 04-11-2006, 07:10 PM

Good question.... BOB?

strictlypersonl · #9 (**permalink**) 04-12-2006, 05:18 AM

Considering that these cars are rarely driven in wet or dirty conditions, the backing plates are not especially useful. You can take them off without losing much.

ack fia · #10 (**permalink**) 05-01-2006, 10:05 AM

I completed the instalation this week and noticed that the backing plate also includes a bearing protection shield. I trimmed the back plate to keep the three mounting bolts and the bearing protecter but cut off all of the rest of the metal.
The installation was simple and the new calipers feel much better. Stopping power will be tested on Friday, May 12 at Lime Rock.

Jim Holden · #11 (**permalink**) 05-01-2006, 01:43 PM

Ack:

Lime Rock? You are of the db limitations? 89 db. As a friend says; "My copier at 6 feet makes more noise than that."

J

Chaplin · #12 (**permalink**) 05-01-2006, 02:06 PM

Nice looking units. Please let us know how well they work.

Do they offer a red powder coat?

strictlypersonl · #13 (**permalink**) 05-01-2006, 02:25 PM

Quote:

Originally Posted by Chaplin

Nice looking units. Please let us know how well they work.

Do they offer a red powder coat?

Apparently. At least they show them on their web page

Chaplin · #14 (**permalink**) 05-01-2006, 03:14 PM

Thanks Bob! I guess I could have checked their website too

Bob-
If you swapped these front calipers, how much adjustment of the front/rear bias (std jag rear) do you think would be required?

ack fia · #15 (**permalink**) 05-01-2006, 04:12 PM

Jim,
The little 302 in my car seems rather quiet through the stock ERA pipes for an FIA car. I guess I'll find out if there is a problem with the db level.
I will be in the novice (first time) group so maybe the driving won't be that aggressive. Wish me luck.
Pat

strictlypersonl · #16 (**permalink**) 05-02-2006, 05:00 AM

Chaplin,

The 2 x 43mm piston calipers will give you a little more braking in the front - probably not enough change to warrant a balance bar adjustment. It depends on the pad friction coefficient. A little dynamic testing

should be the final word.

Chaplin · #17 (**permalink**) 05-02-2006, 06:01 AM

we can do that

ERA 626 · #18 (**permalink**) 05-02-2006, 07:50 AM

The SSBC calipers seem to feel a little better, a huge differance? no.
But they sure look nice.

Chaplin · #19 (**permalink**) 05-02-2006, 08:17 AM

Not a huge difference? That's somewhat disappointing. Aside from the improved looks, do you think it's worth the $$ to change?

Bob- Are the Widwood calipers that you offer a straight bolt-on or do they require modification? Would they offer more stopping power than the SSBC calipers?

strictlypersonl · #20 (**permalink**) 05-02-2006, 08:36 AM

The Wilwood/Sierra system requires steering knuckle modifications before chassis ~650.