Last issue before first drive...

[iwantacobra427]

Brake lights are not working. The relay works and I have power at the brake switch. When I powered the relay directly, the brake lights worked. I replaced the switch and still.. no brake lights. The only thing I can think of is that I'm not developing enough pressure at the switch to close the circuit. I spent a lot of time bleeding the brake lines. Any ideas?

[cobred]

Jump the wires at the switch together to bypass the switch.

[iwantacobra427]

I did that too.. The brake lights work.

[strictlypersonl]

Check that the balance bar angle is adjusted properly. If the angle is set incorrectly, the pedal might feel firm but one side will not develop pressure.

Balance Bar Adjustment