Main Menu
|
Nevada Classics
|
Advertise at CC
|
November 2024
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
|
CC Advertisers
|
|
07-02-2010, 01:55 PM
|
|
Half-Ass Member
|
|
|
Join Date: Jun 2005
Cobra Make, Engine: ERA #732, 428FE (447 CID), TKO600, Solid Flat Tappet Cam, Tons of Aluminum
Posts: 22,001
|
|
Not Ranked
ERAChas - A Simple Coolant Math Problem
Chas, RodKnock's engine is now two years old and he knows he needs to change the coolant but doesn't want to hassle with burping the notorious FE air pocket that always develops, flushing the the heater core, etc. so he came up with a wonderful "simple" method for changing the coolant the "EZ way." Rod is going to simply open the petcock at the bottom of the radiator and drain one gallon of old coolant in to a catch basin while simultaneously filling his surge tank with one gallon of new coolant so that it is always full and no air gets in to the system. Just one gallon, mind you; no more. He will then take the car for a ride to thoroughly circulate the coolant, let the car cool, then drain another gallon of old coolant out while simultaneously replacing it with a new gallon. But Rod is smart, he realizes that his system holds four gallons and that while the first drain and fill replaced 25% of that old coolant with new coolant, the second drain actually had one quarter of a gallon of new coolant in it, so he was really only replacing three quarters of a gallon of old coolant. After two "drain and fills" he now has a system with two and one quarter gallons old coolant and one and three quarters new coolant. Rod says he will be happy if he can replace 90% of his old coolant with new coolant. How many times will he have to repeat his "drain one gallon while adding one gallon and then drive" task in order to achieve his goal of a 90% coolant change? Show your work for full credit.
|
-
Advertising
07-02-2010, 02:27 PM
|
Senior Club Cobra Member
|
|
|
Join Date: Jul 2000
Location: Las Vegas,
NV
Cobra Make, Engine: ERA 427 SO
Posts: 1,126
|
|
Not Ranked
Four gallons = 512 ounces of liquid. If he wants to change out at least 90% of the old fluid, he can allow 10%, or 51.2 oz of old fluid left in the system. Each time he changes 1/4 of the fluid he leaves 3/4 (75% or 0.75) of whatever is in it. If he did this routine 8 times, he would have 512 x 0.75^8 of old fluid. 0.75^8 = 0.1001, roughly 10%, so 512 x 0.75^8 = 51.2578 oz, slightly more than 10% old fluid. Therefore he has to do this change 9 times to have 10% or less of the old fluid (he would have 7.51% old fluid and 92.49% fresh fluid, or 473.5566 oz of fresh fluid and 38.4434 oz of old fluid.
Why did I just do that?
__________________
Ken
|
07-02-2010, 02:30 PM
|
|
Senior Club Cobra Member
|
|
|
Join Date: Mar 2001
Location: Southern Connecticut,
CT
Cobra Make, Engine: SPF - 351W, 944 non-turbo
Posts: 2,105
|
|
Not Ranked
He's walking halfway to the wall. BTW - the answer is 8 times.
Bob
Last edited by Bob In Ct; 07-02-2010 at 07:53 PM..
|
07-02-2010, 02:32 PM
|
|
Half-Ass Member
|
|
|
Join Date: Jun 2005
Cobra Make, Engine: ERA #732, 428FE (447 CID), TKO600, Solid Flat Tappet Cam, Tons of Aluminum
Posts: 22,001
|
|
Not Ranked
Quote:
Originally Posted by mr0077
Each time he changes 1/4 of the fluid he leaves 3/4 (75% or 0.75) of whatever is in it.
|
The ratio of good to bad coolant changes on each iteration. It is not a 1/4 to 3/4 constant.
|
07-02-2010, 02:46 PM
|
|
Senior Club Cobra Member
|
|
|
Join Date: Feb 2007
Cobra Make, Engine: KMP 539, a Ton of Aluminum
Posts: 9,591
|
|
Not Ranked
The problem is specious. The fluid in the coolant system was changed March 2009 at the same time a coolant recovery tank was added.
Heater core? Puh-leeze. I didn't mark PS, AC, PW, PB, PDL and convertible top on the option sheet either.
And no. I don't have cupholders either.
|
07-02-2010, 02:47 PM
|
|
Half-Ass Member
|
|
|
Join Date: Jun 2005
Cobra Make, Engine: ERA #732, 428FE (447 CID), TKO600, Solid Flat Tappet Cam, Tons of Aluminum
Posts: 22,001
|
|
Not Ranked
Quote:
Originally Posted by RodKnock
The problem is specious.
|
True, but only because Chas will not be able to figure it out.
|
07-02-2010, 02:49 PM
|
|
Senior Club Cobra Member
|
|
|
Join Date: Feb 2007
Cobra Make, Engine: KMP 539, a Ton of Aluminum
Posts: 9,591
|
|
Not Ranked
BTW, no traditional coolant either. A little bottle of Water Wetter and Pencool and the rest is distilled water.
|
07-02-2010, 06:32 PM
|
CC Member
|
|
|
Join Date: Oct 2003
Posts: 4,078
|
|
Not Ranked
Quote:
Originally Posted by patrickt
True, but only because Chas will not be able to figure it out.
|
Nooooooo...because Chas will not be stupid enough to dignify child games with a reply as poor Ken realized he had done.
Pat-did you get bounced off the Harry Potter Forum? Ran out of broken parts to flood us with macro digital full-color close ups? Slow night over on FE?
Well Rod, our precocious child is at it again. This is why he has 11,059 posts (ELEVEN THOUSAND FIFTY-NINE). I wish Keith, Barry, George, Clayton, Acton, Tom, Kincade and Mike had 11,000-(they don't have that many combined). We would all learn far more about our cars and motors and not Readers Digest popcorn games.
What's next to entertain we children Mr. Wizard-find the rabbit in the maze pictures?
A valuable help to any hands-on guys is this tip: block drains. Put brass petcocks in place of the block drain plugs, attach tubing to reach into your drain pan. When changing, drain from the lower rad hose, and both petcocks. You get a complete purge that way and refill through the temp sensor boss on the intake.
Now that's something people can use.
__________________
Chas.
|
07-02-2010, 06:53 PM
|
|
Half-Ass Member
|
|
|
Join Date: Jun 2005
Cobra Make, Engine: ERA #732, 428FE (447 CID), TKO600, Solid Flat Tappet Cam, Tons of Aluminum
Posts: 22,001
|
|
Not Ranked
Quote:
Originally Posted by ERA Chas
Nooooooo...because Chas will not be stupid enough to dignify child games with a reply as poor Ken realized he had done.
|
Actually he did a very nice job. When I ran the numbers, 8 changes would get you an 89.99% coolant change... but, that ain't 90%, so he is technically correct.
Quote:
Originally Posted by ERA Chas
Put brass petcocks in place of the block drain plugs, attach tubing to reach into your drain pan. When changing, drain from the lower rad hose, and both petcocks. You get a complete purge that way and refill through the temp sensor boss on the intake.
|
Uhhh, I would rather just change a gallon out after eight drives.
Last edited by patrickt; 11-02-2016 at 12:56 PM..
|
07-02-2010, 07:19 PM
|
CC Member
|
|
|
Join Date: Dec 2001
Location: Louisville,
KY
Cobra Make, Engine: I'm Cobra-less!
Posts: 9,417
|
|
Not Ranked
Don't make me break out the differential calculus on you Patrick.
|
07-02-2010, 07:23 PM
|
|
Half-Ass Member
|
|
|
Join Date: Jun 2005
Cobra Make, Engine: ERA #732, 428FE (447 CID), TKO600, Solid Flat Tappet Cam, Tons of Aluminum
Posts: 22,001
|
|
Not Ranked
It's really an interesting question. When you open the petcock on, say, an ERA, it is on the lower driver's side of the radiator. The upper radiator hose goes to the top driver's side of the radiator, lower radiator to the bottom passenger side. If there are three or four holes drilled in the thermostat, will the fluid coming out the petcock be equal amounts from both the radiator and the block?
|
07-02-2010, 07:24 PM
|
CC Member
|
|
|
Join Date: Oct 2003
Posts: 4,078
|
|
Not Ranked
Quote:
Originally Posted by patrickt
Uhhh, I would rather just change a gallon out after eight drives.
|
For a guy that loves to brag about his he-man solid lifter noise, you're some pu$$y when it comes to doing actual WORK.
Surprised a cam that small can actually make noise. Get a free matching dress with that cam?
__________________
Chas.
|
07-02-2010, 07:28 PM
|
|
Half-Ass Member
|
|
|
Join Date: Jun 2005
Cobra Make, Engine: ERA #732, 428FE (447 CID), TKO600, Solid Flat Tappet Cam, Tons of Aluminum
Posts: 22,001
|
|
Not Ranked
Quote:
Originally Posted by ERA Chas
Surprised a cam that small can actually make noise. Get a free matching dress with that cam?
|
No, but I got a POS damp Ner.
Blykins, will the coolant level in the block and the coolant level in the radiator decline at an equal rate when the petcock is opened? I never took a fluid dynamics class....
|
07-02-2010, 08:01 PM
|
|
Senior Club Cobra Member
|
|
|
Join Date: Feb 2007
Cobra Make, Engine: KMP 539, a Ton of Aluminum
Posts: 9,591
|
|
Not Ranked
Quote:
Originally Posted by ERA Chas
Surprised a cam that small can actually make noise. Get a free matching dress with that cam?
|
Now that's funny.
But it's the "K" cam. Or was it the "R" cam? "B" cam? Eh doesn't matter.
To be honest with you, if I were doing it, then I would have to "wear the dress" and take 8 drives.
Last edited by RodKnock; 07-02-2010 at 08:06 PM..
|
07-02-2010, 08:03 PM
|
|
Half-Ass Member
|
|
|
Join Date: Jun 2005
Cobra Make, Engine: ERA #732, 428FE (447 CID), TKO600, Solid Flat Tappet Cam, Tons of Aluminum
Posts: 22,001
|
|
Not Ranked
Quote:
Originally Posted by RodKnock
Now that's funny.
But it's the "K" cam. Or was it the "R" cam? "B" cam? Eh doesn't matter.
To be honest with you, if I were doing it, then I would have to wear the dress and take 8 drives.
|
It's the "K" cam, thank you very much. DCDoug has the "B" cam.
|
07-02-2010, 08:26 PM
|
CC Member
|
|
|
Join Date: Jul 2008
Location: Driftwood,
TX
Cobra Make, Engine: Contemporary Cobra, 427 side oiler
Posts: 1,850
|
|
Not Ranked
Finally, proof of the infinite monkey theorem.
|
07-02-2010, 08:28 PM
|
|
Half-Ass Member
|
|
|
Join Date: Jun 2005
Cobra Make, Engine: ERA #732, 428FE (447 CID), TKO600, Solid Flat Tappet Cam, Tons of Aluminum
Posts: 22,001
|
|
Not Ranked
Ahh, the road to Hell... All I try to do is help RodKnock change his coolant and what does it get me.
|
07-02-2010, 08:50 PM
|
CC Member
|
|
|
Join Date: Oct 2003
Posts: 4,078
|
|
Not Ranked
Quote:
Originally Posted by elmariachi
|
A perfect explanation of our 'clever' counselor...
__________________
Chas.
|
07-02-2010, 08:52 PM
|
|
Half-Ass Member
|
|
|
Join Date: Jun 2005
Cobra Make, Engine: ERA #732, 428FE (447 CID), TKO600, Solid Flat Tappet Cam, Tons of Aluminum
Posts: 22,001
|
|
Not Ranked
Quote:
Originally Posted by ERA Chas
A perfect explanation of our 'clever' counselor...
|
Isn't it past your bed time?
|
07-02-2010, 08:59 PM
|
CC Member
|
|
|
Join Date: Oct 2003
Posts: 4,078
|
|
Not Ranked
Quote:
Originally Posted by patrickt
Isn't it past your bed time?
|
NAAAAhhhh-I enjoyed watching the Mets beat the crap out of your team while I beat the crap out of you here
__________________
Chas.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 10:39 PM.
|