Which Pilot Bearing?

Redd Snake · #1 (**permalink**) 05-27-2002, 01:50 PM

I'm matching an FE to a 5-speed Tremec TKO. The FE is a 427 with a 428 crank. The tranny input shaft is 1-1/8" diameter with 26 splines. I'd like to use a roller-style bearing (but would go with a bushing if a roller isn't available), but have not been able to locate one that matches the requirements.

Any suggestions as to specific brands/part numbers?

Thanks.

thundercat · #2 (**permalink**) 05-27-2002, 06:23 PM

i have basicly same set up.. i got mine from dynamic motorsports..BCA FC-66067 needle bearing pilot for 428 with tremec TKO about $25 talk to mark dove 513-738-4000



FE Forums sponsored by Keith Craft Inc.