Erson Roller Rockers for Edelbrock Heads

[blykins]

Rick Lake, you would need the Ersons for Edelbrock aluminum heads. From what I understand the Shelby heads are pretty much Edelbrock pieces with Shelby names stamped on them.

[undy]

Originally Posted by blykins

From what I understand the Shelby heads are pretty much Edelbrock pieces with Shelby names stamped on them.

So .... let me get this straight .... The Shelby's are replicas??? I guess we need to get ol' Vic Jr. to put a legal arse whippin' on ol' Shel..

[blykins]

Dave, I've heard that from several sources....although I've never had a set of Shelby's in my hands.

[blykins]

Some other members have emailed me some info that may prove me wrong....so you may want to take what I've heard concerning Shelby/E-Brock heads with a grain of salt.

[undy]

Originally Posted by blykins

Some other members have emailed me some info that may prove me wrong....so you may want to take what I've heard concerning Shelby/E-Brock heads with a grain of salt.

I, for one, will "live the dream" and remain believing it is true...

Dave

[bobt427]

I have been thinking about buying a set of roller rockers. I have Edelbrock heads,and a crane Hyd.flat tappet cam.what type of push rods do I need the type with the cup or the ball ends,and what length?

[FFR428]

There was a recent thread on the net54 forum about the Shelby vs Edel heads and where they were/are made. I beleive it was Mike LeFevers who chimed in with some interesting info. It's back a few pages on pg 4. Look for the "Shelby Alumnium Heads" thread.

g.

[ERA 626]

T&D rockers in my Mustang 347


Harland Sharp in my old 428