oil leak

poysnis · #1 (**permalink**) 06-13-2006, 08:03 PM

I have an oil leak at the rear of my 428 that was not there before. I replaced my old 71 cc heads with some new 69 cc heads canton pan windage tray and a set of roller tipped rocker arms. It appears that it is coming from the fly wheel area. I did not change any thing in there however. This is an older car built in 1993 I have had since construction about 7500 miles on it.

Loadco · #2 (**permalink**) 06-14-2006, 05:47 AM

Check your valve covers and the rear of the intake. Odds are it is one of those 2 areas. It will run down the back of the block and make it appear to be a leak at the back of the oil pan/fly wheel area.



FE Forums sponsored by Keith Craft Inc.