Roller CAM -FE

[Jamo]

Hehehe...and it's got over 10k miles on it. Uber streetable.

[blykins]

Jamo, you running that much duration?

Also, what would the solid guys' catch phrase be?

Talking smack with a clickety clack?

[undy]

Jamo, evidently one's definition of "Uber streetable" is not necessary another's... Geez, and I though I wuz a HP crazed maniac.


nah... Talking with Pat who has a cam that's flat...

[ERA Chas]

Originally Posted by Jamo

Undy...those are basically my cam specs.

Jamo,
Please share your spring specs and how often you need to change them. I know you drive your car a lot.

[Excaliber]

My Comp Cam is 282 duration and 571 lift, 110 lobe separation. Nice lumpy idle and decent street manners. WAY better street manners than the solid roller I was running. The springs are what Comp Cam recommended for this profile, I've got 7,000 plus miles on the clock. Most of that is Hawaii "stop and go" hard miles!

[blykins]

Originally Posted by undy

Talking with Pat who has a cam that's flat...

My ace in the holer is one that's a roller.

[Jamo]

Originally Posted by blykins

Jamo, you running that much duration?

Also, what would the solid guys' catch phrase be?

Talking smack with a clickety clack?

Just a smudge less than Undy's dream motor...270 @.050 on both ends. Just shy of 11 to 1.

[Jamo]

Originally Posted by ERA Chas

Jamo,
Please share your spring specs and how often you need to change them. I know you drive your car a lot.

Can't find the sheet on the springs, but no changes made thus far.