|
tow bar on GT 40
I started last year reworking my GT 40.
I started painting it last week but today I finished installing a tow bar. The round pipe is stainless and the end mounts are 1/4" aluminum plate. Nothing fancy. I wanted something for the tow truck to hook to. Plus I'm going with a race car theme. Dwight http://www.clubcobra.com/photopost/d...2_7_reszed.jpg |
with body on
|
Looks great Dwight!
|
Thanks
I worked on a couple of the cover plates today. Also drop in and check on the progress of the rear clip at the paint shop. Dwight |
Dwight:
Keep in mind that the force associated with towing will be carried through the two plastic spacer blocks and two quarter inch bolts (if memory serves me correct, may be less) where the front aluminum extension meets the chassis at the top of the foot well. For a very low speed tow off the race track should not be a problem, otherwise you may want to reinforce the connnection point noted. I am not an engineer but I suspect the small bolts and plastic block were designed to give some break away protection in the event of a severe frontal impact. I like the idea, however. Good work! Chuck |
tow bar
Thanks for point that out.
I looked at my pictures and found one of the front end. The side plates that I mounted to are held on with a large aluminum block with two bolts. I installed the tow bar for a tow truck to hook to. There is nothing he could hook to without damaging fiberglass. I have had my Cobra tow a couple of times and Coach's Coupe once. I could not find a place on the GT 40 to hook to. So I install this tow bar. I hope I never need it but; Dwight http://www.clubcobra.com/photopost/d..._4_resized.jpg |
After looking at the picture I don't know if that block is plastic or aluminum. Allan covered it with bed liner. I will have to scrape some off to see.
Thanks I check that today. Dwight |
| All times are GMT -7. The time now is 04:48 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: