Kirkham SALE!!! Scratch and Dent Clean Up Do It Yourself

[David Kirkham]

Originally Posted by mickmate

David do you know the offset of those rotor hats?

The offset is 0.680 inches. This measurement is taken from the inside face of the hat (we mount our hats on the OUTSIDE of the hub) to the mounting face for the rotor.

The center of the hat is 0.300 inches thick.

David

[David Kirkham]

Caliper Wilwood,

Part number CS-120-7726

Radial mount caliper. We used this in the design phase of the billet chassis car. New.

Retail $250

http://www.summitracing.com/parts/WIL-120-7726

Today $125

We have been asked why we are selling all these calipers. We don't use them. We bought them during the engineering phase of making our suspension. Please check the part numbers for your particular application. Please do not assume we use these calipers on our cars.

[David Kirkham]

Caliper Wilwood,

Part number CS-120-7380

Radial mount caliper. We used this in the design phase of the billet chassis car. New.

Retail $250

http://www.summitracing.com/parts/WIL-120-7380

Today $125

[David Kirkham]

Wilwood caliper. Set of 2. Very good calipers. These have different sized pistons front to rear to minimize brake pad taper.

They are $180 each.

http://www.revolutionbrake.com/wilwo...superlite.html

They come with a set of brake pads--part number 15D-4332K $60 retail.

Total $420

All new.

We will let both calipers and the brake pads all go for $200

[David Kirkham]

Very nice Wilwood 6 piston calipers. We used these in the development of the billet chassis car. New

Retail $350 each

http://www.jegs.com/i/Wilwood/950/120-5957-RS/10002/-1

Total $700

Today $350

[David Kirkham]

Original Lucas type electrical connectors.

Retail 0.75 each.

Let me know how many you want. We have lots.

Today 0.25 each.

[David Kirkham]

I just found another stash

David

[David Kirkham]

Sway bar end links. Polyurethane.

New (but dirty)

$5

[David Kirkham]

Battery cables.

Lengths
37 1/2
31

Retail $20
Today $5

[GT350Mike]

Originally Posted by David Kirkham

Battery cables.

Lengths
37 1/2
31

Retail $20
Today $5

David,
I'll take the cables.

Thanks!

Mike

[David Kirkham]

These are still for sale. This is a killer price!

This is a complete, brand new, pedal box assembly. This includes the pedal box, brake and clutch pedals, brake and clutch master cylinders, and brake bias bar. We have 3 more of these for sale.

5 SOLD

I found 5 more boxes today. They are powder coated black steel. They are NOT stainless. There is a chance a stainless one will turn up.

Retail $700
Today $350

[David Kirkham]

PRICE REDUCED!!!

This is part of an original 427 Street Cobra. This is the 3/4 square tube that goes from the front shock tower to the cowl hoop (under the windshield).

$35
$25



This is part of an original 427 Street Cobra. This is the rear sub-structure that forms the side of the trunk opening.

$45
$25

[David Kirkham]

WE STILL HAVE A FEW MORE OF THESE!!!

This is a GREAT price!

This is a roll bar for a 427 car. It is made from 321 stainless. The tube is 1 1/2 OD with a 0.120 wall.

Retail $750
Today $325

4 SOLD

[David Kirkham]

PRICE REDUCED!!!
AGAIN!!!

This is the trunk tray out of an original 289 Cobra.
$500
$400

[David Kirkham]

1 inch wide Emery Paper (Sand paper) There are 4 boxes of 50 grit and one box (on top) of 40 grit. Brand new. Probably $30 each for a box.

$25 for all 5 boxes.
$15 for all 5 boxes
SOLD

[Three Peaks]

Originally Posted by David Kirkham

1 inch wide Emery Paper (Sand paper) There are 4 boxes of 50 grit and one box (on top) of 40 grit. Brand new. Probably $30 each for a box.

$25 for all 5 boxes.
$15 for all 5 boxes

David,
I'll take the emery paper. Add it to my box.

Thanks,
Bob

[David Kirkham]

Originally Posted by Three Peaks

David,
I'll take the emery paper. Add it to my box.

Thanks,
Bob

Done.

Thanks!

David

[David Kirkham]

UPDATE
We have a few more of these left.

Very interesting parts. These are replacement bushings for the sway bar of an original 289 or 427 Cobra. We bought these some 10 years ago from Mark Hefte. Mark Hefte bought out Shelby's inventory when they finally went out of business. These are OEM replacement parts.

UPDATE!!!
WE HAVE MANY SETS OF THESE. PRICE IS FOR ONE BAG.

Retail $25
Today $10

MANY SOLD--MANY STILL LEFT IN BOX

[David Kirkham]

289, 302 thermostat housing. Used. Good condition

$5

[David Kirkham]

UPDATE
PRICE REDUCED AGAIN!!!

These are the latest modification we did to the original style rear lower control arms before we switched entirely to billet suspensions. We replaced the bearing with an adjustable rod end to more easily adjust camber and caster in the rear suspension. Rear caster is adjusted by lengthening and shortening the bushings in the rod end. We replaced the original bearing because it really didn't have enough travel and the bearing beat out over time.

Retail on these 427 Rear lower control arms is $500 each. I will let these go for $350 each.

We have 3 sets of these.
Price Reduced!!! $250 EACH

$195 EACH