Kirkham SALE!!! Scratch and Dent Clean Up Do It Yourself

[David Kirkham]

Originally Posted by maurice19

David,
I need the complete conversion kit from internal to external hydraulic throw out bearing,
Should I call Steve or Tom tomorrow if you don`t haven`t found one on the scratch and dent list?
Maurice

Give us a ring tomorrow. We'll see what we can find. I haven't gotten to that area of the shop yet.

David

[David Kirkham]

Originally Posted by Rottie

David,
I am also looking for a complete external throw out bearing set up for a Shelby Alluminum engine, including the Quicktime bellhousing. Also looking for a stock looking shifter handle for a TKO 600 and a billet driveshaft loop.

I will check into the external throw out bearing tomorrow. Do you want the bent 427 shift handle for a Tremec? The billet drive shaft safety loop isn't a problem.

David

[acindrich]

My car has a noisy muffler, well, two noisy mufflers on each side. Can I get a new car?

[David Kirkham]

Originally Posted by acindrich

My car has a noisy muffler, well, two noisy mufflers on each side. Can I get a new car?

Hey Chris! Did you finish your hard top?

When are you going to joint us for a workout in the gym?

David

[mrmustang]

David,

Email address for paypal? Think $10 will cover shipping of the two hood scoops?


Bill S.

[mrmustang]

Originally Posted by David Kirkham

We don't have any 289 Leaf spring chassis on sale right now. We do take paypal.

David

I bid $7,000.............Oh, wait, wrong web site



Bill S.

[Rottie]

Originally Posted by David Kirkham

I will check into the external throw out bearing tomorrow. Do you want the bent 427 shift handle for a Tremec? The billet drive shaft safety loop isn't a problem.

David

Yes David,

I am looking for the bent handle.

Peter

[Fullchat289]

David:

Interested in one of the rough-cast Lemans Fuel Caps and possibly the FIA gauges (comp I'm assuming???) if you can get pic up of them..?? Trip over that FIA comp dash I've been bugging you about?

- Allen.

[slider701]

Originally Posted by David Kirkham

Garage Art!

Cast Kirkham Motorsports brake and clutch pedal. Investment cast in aluminum. We have 20 of these in stock. They are not machined.

$10

David,

If you have any of these pedals left I would like to get one of them if possible. At this point in my life I think it is the closest thing I will get to owning a Kirkham..........at least for a while.

I think you sold out of all of the gas caps but if you unearth anymore of them I would be interested in one of those also. I think the gas cap would make a nice candy dish for my desk once it was cleaned up and mounted to a small piece of wood.

I'll send you a separate e-mail on payment for the pedal along with my address.

Thanks,
Mike Luzader

[DougD]

David
I'm very interested in a complete soft top including bows, attaching hardware and side curtains for a 427 car. Or whatever you have on hand.
DougD

[1ntCobra]

David,

I sent you a pm with the email address for my paypal account. I think you can use that to send me a request for payment from your account.

If you combine my clutch and brake pedals into MrMustang's box with the hood scoops for shipping to his shop, then I'll pick up the shipping cost for the combined order.

Thanks,
Ken

Originally Posted by mrmustang

David,

Email address for paypal? Think $10 will cover shipping of the two hood scoops?


Bill S.

[ACademic]

I wonder if any of the other roller manufacturers (ERA, SPF, Backdraft, etc.) are taking notes on the popularity and success of this thread? What a great way to clear out the rafters of parts that otherwise will continue to sit. Cash is king these days.

[slider701]

Originally Posted by ACademic

I wonder if any of the other roller manufacturers (ERA, SPF, Backdraft, etc.) are taking notes on the popularity and success of this thread? What a great way to clear out the rafters of parts that otherwise will continue to sit. Cash is king these days.

I'm sure that when the sale is all said and done David will probably make less than what he has invested in time posting pictures, answering calls, packaging stuff up, etc.

What he will accomplish is clearing out old stuff that he just couldn't justify throwing away, while making a few $$ off of it. Kind of like the 10+ Rubbermaid containers of baby clothes that I cannot convince the wife to just donate to the Salvation Army so she want me to try eBaying them one piece at a time. There are days I would like to pay someone to just come take them all so I can tell her I sold it for $100 just to make her happy.

The one thing David has accomplished is slowing down the productivity of 100's of us at our normal jobs as he keeps feeding us these pictures, waiting for the next killer deal to come along.

[David Kirkham]

Originally Posted by LewPoberezny

David, Do you have any Turkey Pans Left?

Lew,

On the way! Thanks for the call today.

David

[David Kirkham]

Originally Posted by kris-kincaid

What about that 289 body/ leaf spring chassis? How much is that? Do you take Paypal?

Unfortunately, we don't have any 289 cars in this sale.

David

[David Kirkham]

Originally Posted by slider701

David,

If you have any of these pedals left I would like to get one of them if possible. At this point in my life I think it is the closest thing I will get to owning a Kirkham..........at least for a while.

I think you sold out of all of the gas caps but if you unearth anymore of them I would be interested in one of those also. I think the gas cap would make a nice candy dish for my desk once it was cleaned up and mounted to a small piece of wood.

I'll send you a separate e-mail on payment for the pedal along with my address.

Thanks,
Mike Luzader

Originally Posted by slider701

I'm sure that when the sale is all said and done David will probably make less than what he has invested in time posting pictures, answering calls, packaging stuff up, etc.

What he will accomplish is clearing out old stuff that he just couldn't justify throwing away, while making a few $$ off of it. Kind of like the 10+ Rubbermaid containers of baby clothes that I cannot convince the wife to just donate to the Salvation Army so she want me to try eBaying them one piece at a time. There are days I would like to pay someone to just come take them all so I can tell her I sold it for $100 just to make her happy.

The one thing David has accomplished is slowing down the productivity of 100's of us at our normal jobs as he keeps feeding us these pictures, waiting for the next killer deal to come along.

Mike,

Just give us a ring and we'll get a pedal out for you. I'll find another gas cap for you as well.

Yes, posting these parts is time consuming, but we have gotten many calls and emails from customers thanking us for the parts they were needing but just didn't have the money to get during these economic times. Others have called and thanked us for helping them to get their ride back on track after it has languished for too long in the garage without any love.

I'll keep posting parts. Maybe we'll find exactly what you are looking for.

David

[David Kirkham]

UPDATE FROM POST #15

PRICE REDUCED!!!

This is a foam FE engine block with heads. When we bought this, the heads were separate.

http://www.summitracing.com/parts/PYP-3035/

These are incredibly useful for building up a chassis to make sure everything fits without having to deal with a very heavy engine.

From the pictures below, you can see the block has been used and parts have been broken and re-glued over the past couple of years. The block still works fine for fitting, however.

Price Reduced!
Retail $450
Will sell for $175
Now $125

[David Kirkham]

UPDATE
PRICE REDUCED!!!

These are the latest modification we did to the original style rear lower control arms before we switched entirely to billet suspensions. We replaced the bearing with an adjustable rod end to more easily adjust camber and caster in the rear suspension. Rear caster is adjusted by lengthening and shortening the bushings in the rod end. We replaced the original bearing because it really didn't have enough travel and the bearing beat out over time.

Retail on these 427 Rear lower control arms is $500 each. I will let these go for $350 each.

We have 3 sets of these.
Price Reduced!!! $250 EACH

[David Kirkham]

POST 69 UPDATE!!!
PRICE REDUCED!!!

BRAND NEW!

Below are a set of head tubes for a 427 car. These headers fit a fit a 351 motor. Notice the head tubes extend all the way out of the body. We designed these so the merge collector is outside the body--just like CSX3020 that Dave Dralle used to drive.

These are made from steel. The flanges will bolt onto the narrow exhaust bolt pattern. They are brand new and in perfect condition. The pipes will need to be trimmed to your collector on your side pipe.

Head tubes retail $1000.
Today--$500
Price Reduced!!! $400

[ACademic]

Originally Posted by David Kirkham

We have two front, left jack hooks. Steel.

$15 each.

David, if one of these is still available I'd like to buy one for use as a possible future template. Your PM is full so I will just send you a check + shipping or await your further instructions. I can also PayPal and add 10% to the total to cover their fees plus your hassle. Thanks.

P.S. These appear ever so slightly dimensionally different in the pic. Are they both identical or are there slight variations in these?