Kirkham SALE!!! Scratch and Dent Clean Up Do It Yourself

[David Kirkham]

UPDATE
Garage Art!

This is the door jam I cut off an original 289 Cobra some time ago during a restoration. Original 0.050 1100 alloy aluminum.

$25
$15

[David Kirkham]

UPDATE

Ford 1968 4 barrel intake manifold.

$75
$50

PRICE REDUCED

$25
SOLD

[David Kirkham]

UPDATE
We still have a couple of these left.


289 original style shifter handle. Fits a Top Loader. We only have 5 of these. $250 retail. $95 Today.

[David Kirkham]

UPDATE
2 LEFT

Shelby American Battery Tray.

This is the battery tray that Shelby used in the CSX4000 cars.

$25 each

[David Kirkham]

UPDATE
We have a few of these left. They have been very popular.

STEERING COLUMN!!!

Includes
main steering shaft, stainless (31 1/2 inches long) $150
steering wheel nut $25
steering wheel hub $125
steering column $150
lower support bearing $50

Hub will accept original steering wheel bolt hole pattern.

The engine end of the main shaft is a "Double-D." We have the original style 3/4 48 spline on the engine side as well (please add $15 for the original end).

Retail $500
Today $250



Steering column tube fits the standard VW turn signal switch




Engine side of the shaft is turned to accept a 3/4 bearing.


Lower bearing support for foot box.


Close up of the lower bearing support which bolts to the foot box.

[David Kirkham]

UPDATE
Still available. Great Christmas gift.

Billet Skateboard

Great Christmas gift for your kids or grandkids

Retail $275
Today $195

[David Kirkham]

UPDATE
There are a few of these left. Mick Mate didn't buy them all.

Garage Art!

This is a raw forging of a steering arm from our factory in Poland. Will fit an original 289 or 427 Cobra when machined. We have sold many of these over the years. This is one of the first forging dies we ever made in Poland.

This part is now machined as part of our billet suspension.

We have 20 of these.

16 SOLD. FOUND 10 MORE FOR A TOTAL OF 30

$10

[David Kirkham]

UPDATE
SOLD

This is a McCluskey rear upper control arm. He made them for Carroll Shelby's Continuation cars in the 90's.

Retail $250
Today $100
$75

[jmimac351]

Originally Posted by David Kirkham

Yes, you have a box with a tach in it. The tach is waiting for more "friends" to join it.

David

I'm looking for a matching speedo, all of the usual 2 1/16" Smiths family members... and maybe a 10psi Stewart Warner Fuel Pressure gauge.

[Three Peaks]

Originally Posted by David Kirkham

1 inch wide Emery Paper (Sand paper) There are 4 boxes of 50 grit and one box (on top) of 40 grit. Brand new. Probably $30 each for a box.

$25 for all 5 boxes.
$15 for all 5 boxes

David,
I'll take the emery paper. Add it to my box.

Thanks,
Bob

[tkb289]

Originally Posted by David Kirkham

UPDATE
We still have a couple of these left.


289 original style shifter handle. Fits a Top Loader. We only have 5 of these. $250 retail. $95 Today.

David,

Will this shifter work on a TKO 600?

If not, can it be modified, or made to work on the TKO 600 with some kind of an adapter?

Thanks.

- Tim

[David Kirkham]

UPDATE

Serious Garage Art!

Below are ORIGINAL NOS Shelby bearings and races made by Timken. We bought these from Mark Hefte many years ago. He bought out the last of Shelby's parts when they closed their doors.

Notice there are two part numbers on the boxes. The first number is the Timken number. The second number that begins with S1CS is the Shelby American number.

S1 stands for a small block car. Also, as there are many parts that are identical between the 289 and 427 Cobra, the S1 could also stand for an original 427 car. The CS stands for Cobra, Shelby.

All of the below bearings are new, in the box. They are all bearings for the differential. We probably have 10 of each bearing or race.

We have sold these on ebay for $200/bearing.
Today, $50 per bearing.
$25 per bearing

Below are pictures of the different bearings we have. Please specify which part number you want when ordering from among the different bearings.

All bearing boxes look like this:



Here are the part numbers on the boxes.

[David Kirkham]

Originally Posted by jmimac351

I'm looking for a matching speedo all of the usual 2 1/16" Smiths family members... and maybe a 10psi Stewart Warner Fuel Pressure gauge.

Working or Garage Art gauges? I just saw another one tonight. (The 4 inch speedo).

David

[David Kirkham]

Originally Posted by Three Peaks

David,
I'll take the emery paper. Add it to my box.

Thanks,
Bob

Done.

Thanks!

David

[David Kirkham]

Originally Posted by tkb289

David,

Will this shifter work on a TKO 600?

If not, can it be modified, or made to work on the TKO 600 with some kind of an adapter?

Thanks.

- Tim

As is, it will not work on a Tremec. However, it can be modified. We have done it several times. You just have to cut the bottom off and bolt or weld a Tremec adapter on.

David

[David Kirkham]

UPDATE
We still have some of these left.

Garage Art!

Cast Kirkham Motorsports brake and clutch pedal. Investment cast in aluminum. We have 20 of these in stock. They are not machined.

$10

[David Kirkham]

1 Kirkham Motorsports Shirt

Next guy to post here and claim it (you must post here) gets a free Kirkham shirt. Name size.

David

[Three Peaks]

Originally Posted by David Kirkham

UPDATE

This is a McCluskey rear upper control arm. He made them for Carroll Shelby's Continuation cars in the 90's.

Retail $250
Today $100
$75

David,
How many of these do you have?

Bob

[tkb289]

Originally Posted by David Kirkham

Working or Garage Art gauges? I just saw another one tonight. (The 4 inch speedo).

David

David,
After you take car of jmimac's request … please keep any eye out for garage art gauges & tidbits for the FIA dash. Thanks!

- Tim

[David Kirkham]

Originally Posted by Three Peaks

David,
How many of these do you have?

Bob

Just one.

David