|
fresh air
I mounted mine in the fender well above the right front tire. Out of site. It's water proof. I drove a 100 miles in the rain since I installed it. No problem. My under the dash vent kit is a hot rod item. Closeable vents.
Dwight |
ST, Perfect Thanks
Dwight,
Can you take a picture of your vent set up at the dash? Do you have a cable pull that opwn and closes a flap? Morgan |
Pics
I'll try to take a few pictures. They are black and chrome plastic. The louvers are opened or closed by hand. Very simple but it works.
Dwight |
that is exactly the way to mount those marine blowers, you only need to insulate the ducting in the engine compartment. I used common Street rod insulation, aluminum foil on one side, a cloth type insulation on the other. summit carries it.
|
Wow this thread took off. Well how did you pay for the marine setup?
chris |
master card
|
Damn I meant how MUCH did you pay. Thanks Smartass ENTdoc. ENT docs are always pains they never want to come in to the ER no one is ever sick.
ERDOC |
Quote:
Quote:
Chuck will be here all week....try the veal. :LOL: |
LMFAO...good one, chuckie.
|
Quote:
We dont ask you guys to come to our office and take care of emergencies ,so do not ask us to come to yours and take care of ent problems |
Entdoc....:lol:
|
Hopefully, none of us need emergent ENT care in SC. This doc expressed his opinion!!!!!!!!!!!!!!!!!!
|
good comeback
|
You know this is all tongue and cheek right?
I'm just razzin you b/c of your remark chris |
I certainly hope so
|
I just bought two of the 170 CFM blowers, 3 inch. Installing it in the wheel well about the wheel, really doesn't get hit by the tire?
|
Yes, the tire is VERY close in there! Be careful where you put them! I would put them further forward, away from the turning wheel.
Also, post some pictures and part numbers of the the fans you got! David :):):) |
This is what I bought:
http://www.eangler.com/product/356790865msk.htm Would it be better to install it just before it goes into the cabin in the engine compartment? Will it fit? I also got this: https://www.12voltaccessoryoutlet.co...&idproduct=820 |
Eangler shipped the blower so fast, I got it overnight! Very well packed, very good company: http://www.eangler.com/product/356790865msk.htm
So I installed it starting Friday night from 9 PM to 1 AM and finished it Saturday from 8:30 AM to 3 PM. Of course this included doing other little things while I was "at it" and a trip to the hardware store for grade 8 bolts, washers, lock nuts, hose clamps, etc. . . But the job is done and the tires, or should I say "tyres" don't rub yet. I did hard figure 8's in a parking lot and, no rub. The the car did stall. . .gotta adjust that carb. . .but that's a different project. . . Let me know if you need any insight on the installation. The hardest part was the wiring, since I wanted it to look invisible once it left the wheel well. Yes, it helps a little, but it's no A/C. The hose part over the headers still need to be insulated. . . I am still waiting for the other fan too. . . http://www.robsdrive.com/cobra/clubcobra/P7210003.jpg http://www.robsdrive.com/cobra/clubcobra/P7210009.jpg http://www.robsdrive.com/cobra/clubcobra/P7210010.jpg http://www.robsdrive.com/cobra/clubcobra/P7210012.jpg |
vents
RED CSX1
this is a poor pic of the vent on the passager's side http://www.clubcobra.com/photopost/d...m/DSCN1201.JPG driver's side mounted on the tunnel http://www.clubcobra.com/photopost/d...m/DSCN1202.JPG fan in the wheel well on the passager's side. It's water proof, I've tested it, about a 100 miles in the rain. http://www.clubcobra.com/photopost/d...m/DSCN1205.JPG |
| All times are GMT -7. The time now is 01:26 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: