Superformance Ball Joints Early Model

[Bxx1]

I have an early # 127 Superformance that I would like to replace or upgrade OEM ball joints. I spoke with Cobra Valley and I dont want to fabricate A-arms (because they no longer carry oem ball joints of such an old vintage) and the required ball joint sleeve...it sounds too difficult and $$$. So, my question is: Does anyone have knowledge of an American made ball joint that would be a direct replacement? I have heard that Chrysler has a ball joint (press in) which might fit (Lower, Chrysler K727) but I don't know for certain if it will work. Thanks in advance for any insight/knowledge you can share.
Ron

[mickmate]

A lot of the racers use that screw in style which is I believe what they are, not the press in.
The Cobra Valley ones are a super upgrade for them I have installed on a couple of SPF's.
If you wanted replacements for the 727's they are here, godspeed Bill.
Speedway 1960-66 Chrysler K727 Style Lower Ball Joint - Speedway Motors, America's Oldest Speed Shop

[BMEP]

You may have seen this but in case not:

Superformance Ball Joints

Here's the Cobra Valley page

Cobra Valley's R/T Super High Performance Ball Joints

Hope that helps