SPF Half Sahft Lengths

Dale McBain · #1 (**permalink**) 08-27-2010, 05:57 PM

Does anyone know which side the long half shaft is installed on the Superformance MK III??

Dale McBain
SPF #469

Jake · #2 (**permalink**) 08-27-2010, 06:36 PM

Dale, try posting on the SPF section of the forum. Somebody will pipe up in minutes.

Jake

Dale McBain · #3 (**permalink**) 08-27-2010, 08:08 PM

Thanks Jake.

Shirt OK?

Dale

WardL · #4 (**permalink**) 08-27-2010, 10:40 PM

Dale, can I go out an measure the lengths on my cobra and tell? Call me if so. I'm home and would happy to check it out. SPF#2608 with Dana rear end.

Jake · #5 (**permalink**) 08-28-2010, 09:34 AM

Dale, the shirt is awesome and you did a great job! Eileen was also very thankful for the shirt and thought. Thanks again for putting all the work into this project.

Jake

Silverback51 · #6 (**permalink**) 08-28-2010, 05:35 PM

Karen and I love our shirts also.

Dale McBain · #7 (**permalink**) 08-30-2010, 09:57 AM

Glad everyone liked the shirts.

Ward Thanks for the offer, but we just put the diff back in Saturday night and measured it. The drivers side shaft turned out to be the longer of the two. Hopefully NW Differentials will have the half shafts and bearing carriers done today.

Bt the way we chucked the stock ford clutch type posi unit in favor of a Tru-Trak posi unit without clutches.

Dale

Silverback51 · #8 (**permalink**) 08-30-2010, 10:29 AM

Quote:

Originally Posted by Dale McBain

Glad everyone liked the shirts.

Ward Thanks for the offer, but we just put the diff back in Saturday night and measured it. The drivers side shaft turned out to be the longer of the two. Hopefully NW Differentials will have the half shafts and bearing carriers done today.

Bt the way we chucked the stock ford clutch type posi unit in favor of a Tru-Trak posi unit without clutches.

Dale

What was the cause of the noise?

Dale McBain · #9 (**permalink**) 09-08-2010, 02:03 PM

The is back together and it does not make any funny noises!

Dale