Looking for new cobra mechanic - N end seattle

Chuck R. · #1 (**permalink**) 11-07-2007, 05:54 PM

Hi, somewhat new to Club. need local help. am having the clutch slave cylinder blues. Tranny (TL) hard to shift into gear, clutch does not fully engage (some slip). Need local recommendations (besides brads) if possible. Hope to get my NAF ready and proper for some spring flings on the backroads with some you. Chuck

Silverback51 · #2 (**permalink**) 11-08-2007, 02:19 AM

Quote:

Originally Posted by Chuck R.

Hi, somewhat new to Club. need local help. am having the clutch slave cylinder blues. Tranny (TL) hard to shift into gear, clutch does not fully engage (some slip). Need local recommendations (besides brads) if possible. Hope to get my NAF ready and proper for some spring flings on the backroads with some you. Chuck

What's wrong with Brads????

Chuck R. · #3 (**permalink**) 11-08-2007, 10:39 AM

nothing really wrong with Brads. Had mediocre experience with them and my 69 Z28 camaro about 10+ years ago. Just seeing if there are others (mechancis) out there close by.

SantaFe66 · #4 (**permalink**) 11-13-2007, 07:42 PM

Talk to Ed Trihey in Mukilteo. Doesn't hurt to just talk and see if he can/will do it. He did a lot of work on my car and owns one himself. He's primarily an engine builder but.........

Paul

Andrew Teal · #5 (**permalink**) 11-13-2007, 10:43 PM

Santa Fe66
Is this the same Ed from Ed machine shop, if it is he is a great engine builder. Built alot of sprint car 410 motors.
Ed also built a Cobra.

Andy