windshield support bracket........

dlotz · #1 (**permalink**) 08-30-2010, 09:18 PM

The windshield support bracket that is at the base of the windshield, centered, and behind the rear view mirror was not part of my FFR package.

Before I fabricate this piece and spend all the time researching and measuring trying to get it right.....

Does anyone make these that I can just purchase off the shelf?

I have the Lexhan shield so I am not worried about this cracking my windshield.

Thanks

Dan

LMH · #2 (**permalink**) 08-30-2010, 11:53 PM

Do you mean the rod/bracket for the windshield to keep the top from pulling the frame apart?
Finishline sells that: http://www.finishlineaccessories.com...roducts_id=283
Larry

ACBill · #3 (**permalink**) 08-31-2010, 12:21 AM

I believe he means the small L shaped brace that attached to the lower center of the windshield frame, the to the body. This was installed on the originals. I am not aware of any place that sells these.

I thought it would be nice to have one, although they may be a bit tricky to install. The small holes on the FFR windshield frame look to be for a self tapping screw, as they are not threaded as others on the frame are. Is that what you planned to use?

dlotz · #4 (**permalink**) 08-31-2010, 07:26 AM

Quote:

Originally Posted by ACBill

I believe he means the small L shaped brace that attached to the lower center of the windshield frame, the to the body. This was installed on the originals. I am not aware of any place that sells these.

I thought it would be nice to have one, although they may be a bit tricky to install. The small holes on the FFR windshield frame look to be for a self tapping screw, as they are not threaded as others on the frame are. Is that what you planned to use?

That is what I am talking about. I will more than likely just bond it to the windshield and body to look like it is screwed in.

PDUB · #5 (**permalink**) 08-31-2010, 08:03 PM

If you mean like in this thread:

http://www.uniquecobra.com/forums/showthread.php?t=8250

Unique has them. Call them at 256-546-3708

They also have the brace that the rearview mirror clamps onto...

Good luck!

dlotz · #6 (**permalink**) 08-31-2010, 08:30 PM

Quote:

Originally Posted by PDUB

If you mean like in this thread:

http://www.uniquecobra.com/forums/showthread.php?t=8250

Unique has them. Call them at 256-546-3708

They also have the brace that the rearview mirror clamps onto...

Good luck!

WOW, if that picture is what they sell than I will make it myself. That looks like crap!!!!
It looks like it was an afterthought and someone just grabbed a scrap piece of metal lying around.

PDUB · #7 (**permalink**) 08-31-2010, 08:48 PM

You could have at least read the thread... and then you'd see why. He's been missing some scews in it for quite some time

. Mine doesn't
"look like crap."