Fans

Bill Hughes · #1 (**permalink**) 11-04-2013, 07:33 PM

The origional 427SC ofcourse hastwo pusher fans. Did it also have "puller fans" behd?

Bill

DougD · #2 (**permalink**) 11-11-2013, 08:33 AM

No, they did not.

mickmate · #3 (**permalink**) 11-11-2013, 08:42 AM

Many aftermarket ones were added by quite a few as the need arose. You'll see some clever variations utilizing the top and bottom radiator mounts for the addition of pullers.

KevinW · #4 (**permalink**) 11-11-2013, 05:15 PM

I mounted mine using some L-shaped brackets off the opt mounting, udnerneath the folded ali top plate.For the bottom of the fan I made some folded sheet brackets that mounted underneath the steering rack.

trularin · #5 (**permalink**) 11-12-2013, 08:21 AM

After a few tries with various configurations and a rack that seemed to get in the way ALL the forking time, a 3/4 inch fan shroud using 3/4 inch angle aluminum with SS screws worked.

Then I took it off and put the old fan back on.

The other thing I discovered was the thermal turn on - turn off circuits available at several places are somewhat temper-mental ( like that? ).

If you put in a puller, I recommend fan shroud and 12 battery ( direct connect ) temperature control.

Just my $0.02 worth.

Tru