Club Cobra GasN Exhaust  

Go Back   Club Cobra > Cobra Talk Areas > Originality Forum

MMG Superformance
Nevada Classics
Main Menu
Module Jump:
Nevada Classics
Nevada Classics
MMG Superformance
MMG Superformance
Advertise at CC
Banner Ad Rates
MMG Superformance
Keith Craft Racing
Keith Craft Racing
MMG Superformance
November 2024
S M T W T F S
          1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30

Kirkham Motorsports

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
  #1 (permalink)  
Old 03-02-2009, 05:50 AM
mickmate's Avatar
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Sep 2000
Location: Holderness, NH, US of A, NH
Cobra Make, Engine: CSX 4772 old iron FE
Posts: 5,499
Not Ranked     
Default Original switches and buttons possible group buy

Hey guys. We have a few of us interested in purchasing all the switches and buttons for the dash of our cars. We are prepared to make minor deviations for the sake of better quality, and of course no longer availabile items. Price as always is a concern as none of us want to pay Cobra price tags for garden variety Healey/Triumph stuff.
I'm building a street car and have made a list from the chassis instruction book. We are looking for any good info on part numbers, donor cars and most importantly good suppliers to work with on the parts. We are trying to avoid cheaper quality (Indian) switches made under the Lucas name. Anyone wanting to get in on a group discount can PM me.
Street car like I'm building I believe needs-
Warning lights, blue high beam, green indicators, red ignition.
Panel light switch, must be the rheostat type.
Wiper, two position switch.
Cigar lighter, you SC/Comp guys don't need.
Heater, two position switch.
Headlamps, side and head two position switch.
Racing models need a single position switch for auxiliary fuel pumps.
Horn button, early cars used the VW headlamp dim switch on the back of the stalk with a foot switch for high beam.
Later cars used a horn button on the dash, directional was
Healey/Triumph I believe.
Ignition was by key, alot of folks like ERA use a better, newer, cheaper,
replacement with a correct appearing round slotted ring to retain it.
Thanks in advance for any insight you can give us on this.
__________________
mickmate
http://www.actoncustom.com/
Reply With Quote
  #2 (permalink)  
Old 03-02-2009, 06:49 AM
767Jockey's Avatar
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Feb 2005
Cobra Make, Engine: Contemporary, FE, Tremec TKO 600
Posts: 1,974
Not Ranked     
Default

Two more of us are in on Nicks idea, and we are doing S/C replicas while Nick does his street car. Most of the Lucas toggles are fairly inexpensive (in the $20 to $30 range) and readily available. The killers are the rotary wiper switch and knob with white lettering, and the rotary instrument panel dimmer rheostat and engraved knob. Cobra Restorers is the only place I have been able to find both rotary switches mentioned above, and they are a very dear $104.95 and $149.95 respectively. For the knobs, Cobra Restorers lists the wiper knob for $24.95, and I have been unable to find the knob for the dimmer with the correct white engraving. Does anyone have a more inexpensive source for these? The Lucas part number for the dimmer rheostat is supposedly 3R-78405, and for the wiper rotary switch is PRS7-54033632. Some of the British parts sites are horrendously difficult to navigate. Also, where do we get the knobs from? Also, for the indicator lights on the dash, we need the metal Lucas ones, I believe the ones from Cobra Restorers are correct? Does anyone know for sure? We will each need one each of red, blue and green. I know ERA has most of these parts but I have been unable to get them to sell me any parts at all in the past, and I would expect the same response from them on these parts as well. Is anyone else in the midst of a build or upgrade who wants to try to get in on a possible group buy? Does anyone have an "in" at ERA to get them to play nice? Any and all information on this is greatly appreciated. Anyone else who wants in on the purchase is more than welcomed, I would think that the more we buy the better the deal.

Last edited by 767Jockey; 03-02-2009 at 07:26 AM.. Reason: spelling error, as usual! :)
Reply With Quote
  #3 (permalink)  
Old 03-02-2009, 07:14 AM
KarlCSX2498's Avatar
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Aug 2004
Location: Near Phila. (Collegeville), PA
Cobra Make, Engine: CSX2498 has been in our family garage since '68....Scratch built aluminum bodied 427SC Cobra, 427FE, CSX3000 chassis specs, 95% finished, only needs paint.
Posts: 642
Not Ranked     
Default

Yeah, count me in. I need the complete set of switches & knobs.
later, karl
Reply With Quote
  #4 (permalink)  
Old 03-02-2009, 09:20 AM
CC Member
Visit my Photo Gallery

 
Join Date: Mar 2006
Cobra Make, Engine:
Posts: 113
Not Ranked     
Default Lucas part numbers

Hi,
I have all the Lucas part numbers for the 289/427 cobra.
Regards,Mike.
Reply With Quote
  #5 (permalink)  
Old 03-02-2009, 09:49 AM
mickmate's Avatar
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Sep 2000
Location: Holderness, NH, US of A, NH
Cobra Make, Engine: CSX 4772 old iron FE
Posts: 5,499
Not Ranked     
Default

Hey Mike, how do Dougs part numbers look above?
__________________
mickmate
http://www.actoncustom.com/
Reply With Quote
  #6 (permalink)  
Old 03-02-2009, 09:52 AM
CC Member
Visit my Photo Gallery

 
Join Date: Nov 2003
Location: New Britain, CT
Cobra Make, Engine: Size 10 Feet
Posts: 3,011
Not Ranked     
Default

We currently have to scrounge around the world for NOS switches, etc. Some of them are no longer being made and the premium for someone to find a limited number of them is considerable. Our kits must take priority over retail sales because eventually the currently-scarce will become unobtainable.
When the price gets high enough, someone will reproduce the parts, but that level hasn't been reached on many items yet.
Reply With Quote
  #7 (permalink)  
Old 03-02-2009, 10:16 AM
CC Member
Visit my Photo Gallery

 
Join Date: Jan 2005
Location: Hillsboro, OR
Cobra Make, Engine: Scratch built CSX style frame, Carbon fiber body, 393 Stroker, T-bird IRS, T5
Posts: 1,623
Not Ranked     
Default

I'd be in as long as the prices are somewhat reasonable. However, if the prices are going to be what I've found in my search so far, I think I'm going to have to go with more modern pieces. With the economy as it is, there just isn't any extra cash laying around these days.....

Bob
Reply With Quote
  #8 (permalink)  
Old 03-02-2009, 02:25 PM
CC Member
Visit my Photo Gallery

 
Join Date: Apr 2008
Location: Near Chichester, Sussex by the sea......, UK
Cobra Make, Engine: Crendon 427 S/C 428 FE+toploader
Posts: 668
Not Ranked     
Default

Here in the UK, Hawk cars

http://www.hawkcars.co.uk/hawk427/index.html

stock almost anything cobra-related.
Not always the cheapest, but happy to investigate if you want. The website only shows a handful of what they can supply, most of it not listed there. What they cant buy-in, they make. They supply original AC owners as well.

Kevin
Reply With Quote
  #9 (permalink)  
Old 03-03-2009, 10:43 AM
CC Member
Visit my Photo Gallery

 
Join Date: Apr 2008
Location: Near Chichester, Sussex by the sea......, UK
Cobra Make, Engine: Crendon 427 S/C 428 FE+toploader
Posts: 668
Not Ranked     
Default

OK, phoned Hawk today - turns out they actually supply quite a few places worldwide (incl UK and US) for a variety of parts. As for the two items quoted above they have a couple of units in stock but can make more. The problem, as we know, is that these arent ordinarily available, so instead, their current solution is to take a similar off the shelf item, redrill it so that it has a correct-looking insert and after some workshop treatment, ends up looking cosmetically identical to the original. This extra labour pushes the price up compared to say a standard lucas flick switch. Prices currently are about £60 + VAT = £70 per switch. At the current exchange rate (£1=$1.45) that works out at just over $100.

Gerry Hawkridge, MD at Hawk says that if there was sufficient demand, prices would come down. But would ned to think about the economies of scale before he'd commit further.

cheers,
Kevin

btw, Im not connected to Hawk, other than having bought some minor parts off them.

Last edited by KevinW; 03-03-2009 at 10:46 AM..
Reply With Quote
  #10 (permalink)  
Old 03-03-2009, 10:52 AM
LMH's Avatar
LMH LMH is offline
CC Member
Visit my Photo Gallery

 
Join Date: Apr 2005
Location: Tucson, AZ
Cobra Make, Engine:
Posts: 5,391
Not Ranked     
Default

I'm needing vent "pull" knobs and a rotary dimmer. I have almost everything else I need.
Does Hawk have the dimmer?
Larry
Reply With Quote
  #11 (permalink)  
Old 03-03-2009, 11:02 AM
CC Member
Visit my Photo Gallery

 
Join Date: Apr 2008
Location: Near Chichester, Sussex by the sea......, UK
Cobra Make, Engine: Crendon 427 S/C 428 FE+toploader
Posts: 668
Not Ranked     
Default

Not sure I understood you, but i think they do all the swicthgear for the dash, and they can do the vent knobs (you mean the control that connects to the cold air vents on top of the footwells?). I think its about $40ish for the pullcord with the knob assembly + delivery but i may be wrong. best ring hawk to confirm those things, as I'm starting to sound like a used car lot salesman. the rotary knob i mentioend above.

if you want any more details i am happy to follow up this side of the pond. I'll copy this thread onto the UK Cobra club site http://www.cobraclub.com/forum/snake...tches-etc.html to see if that helps up the numbers.

Kevin

Last edited by KevinW; 03-03-2009 at 11:15 AM..
Reply With Quote
  #12 (permalink)  
Old 03-03-2009, 11:13 AM
LMH's Avatar
LMH LMH is offline
CC Member
Visit my Photo Gallery

 
Join Date: Apr 2005
Location: Tucson, AZ
Cobra Make, Engine:
Posts: 5,391
Not Ranked     
Default

Yeah, it's for the foot box vents. There are knobs made that say "pull" and others made that say "push" but I need the pull ones.
How would be we do this as a group buy? Would it have to be an entire dash set or could there be single parts?
Larry
Reply With Quote
  #13 (permalink)  
Old 03-03-2009, 11:41 AM
KarlCSX2498's Avatar
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Aug 2004
Location: Near Phila. (Collegeville), PA
Cobra Make, Engine: CSX2498 has been in our family garage since '68....Scratch built aluminum bodied 427SC Cobra, 427FE, CSX3000 chassis specs, 95% finished, only needs paint.
Posts: 642
Not Ranked     
Default

Hey, I am in the same position as Larry, I only need a partial or the dash switches & buttons. I emailed Nick and informed him I will pick from his list of part numbers which items I need and he seemed OK with that.

On the vent knobs on CSX2498 the words are: "AIR" in large letters in the middle of the knob and small letters on the bottom are: "PUSH"
the knobs are convex and fluted around the outside edges.

Later, karl
Reply With Quote
  #14 (permalink)  
Old 03-03-2009, 11:54 AM
CC Member
Visit my Photo Gallery

 
Join Date: Apr 2008
Location: Near Chichester, Sussex by the sea......, UK
Cobra Make, Engine: Crendon 427 S/C 428 FE+toploader
Posts: 668
Not Ranked     
Default

guys, i;ve never done one of this before, so i'm a total newbie. In fact we have only just started thinking about this kind of thing in the UK. Can I maybe suggest that we start a table that you can add your name on to different components. sounds like lots of us only need the awkward to find parts, which are probably the most expensive.

my web skills are crap, but maybe someone can improve on this:

Add your name if you're in:
  • Dash Dimmer switch
<add a pic?>

KevinW, <next person>, <next person>, <next person>
  • Headlight switch
  • Footbox PULL knob

etc.
Reply With Quote
  #15 (permalink)  
Old 03-03-2009, 02:05 PM
CC Member
Visit my Photo Gallery

 
Join Date: Mar 2006
Cobra Make, Engine:
Posts: 113
Not Ranked     
Default lucas switch numbers

Hi Mickmate,

Lucas part numbers for AC Cobra dash dimmer switch is Model 3R part number 78365A,windshield wiper switch is Model PRS7 part number 31957 same switch as the one used on late 50's Jaguar XK 150.With this switch you have to use a DR 3 wiper motor the one with 6 leads coming from the motor,also this motor uses a drive cable with a special end (hard to acquire) for the park switch.
Regards,Mike.
Reply With Quote
  #16 (permalink)  
Old 03-03-2009, 02:32 PM
CC Member
Visit my Photo Gallery

 
Join Date: Mar 2006
Cobra Make, Engine:
Posts: 113
Not Ranked     
Default Pics of wiper switch

Couple of pics of the wiper switch

Name:  Lucas parts 003.jpg
Views: 2126
Size:  35.2 KB

Name:  Lucas parts 004.jpg
Views: 2141
Size:  38.8 KB
Reply With Quote
  #17 (permalink)  
Old 03-03-2009, 03:15 PM
CC Member
Visit my Photo Gallery

 
Join Date: Apr 2008
Location: Near Chichester, Sussex by the sea......, UK
Cobra Make, Engine: Crendon 427 S/C 428 FE+toploader
Posts: 668
Not Ranked     
Default

If its XK150, you can see it here....

http://www.xks.com/jaguar/xk_catalog...Electrical.pdf

page 9, item 6/7.

-I'm not sure if the knob is the same though.

Kevin
Reply With Quote
  #18 (permalink)  
Old 03-03-2009, 03:39 PM
CC Member
Visit my Photo Gallery

 
Join Date: Mar 2006
Cobra Make, Engine:
Posts: 113
Not Ranked     
Smile Wiper knob

Reproduction wiper and dash panel knobs are available @ Cobra Restores.
Original Lucas wiper knob number is 318168
Original Lucas panel light knob is 316163
Mike.
Reply With Quote
  #19 (permalink)  
Old 03-03-2009, 04:54 PM
1985 CCX's Avatar
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Mar 2005
Location: Manchester, NH
Cobra Make, Engine: AK1085 (302 Street), HTM111 (427 Comp), CSX2375R (289 Comp) and COB5999 (427 S/C)
Posts: 18,997
Not Ranked     
Default

Dougs #'s are from me, I took them off the Lucas boxes my switch's cam in...
Reply With Quote
  #20 (permalink)  
Old 03-03-2009, 06:25 PM
CC Member
Visit my Photo Gallery

 
Join Date: Jun 2007
Cobra Make, Engine:
Posts: 89
Not Ranked     
Default

Anyone tried Motorsports International? tel 6193909080
I have`nt personally but they have a fairly comprehensive catologue.
Ross
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 12:29 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: CC Policy
Links monetized by VigLink