Radiator & Fan w/mounting brackets

Mike Hausner · #1 (**permalink**) 04-10-2003, 10:06 AM

Brass radiator & electric fan unit with complete stainless steel mounting kit. Radiator is isolated using 4 OEM mounting pads. Everything new, mounted but not used. I have invested about $320 in the radiator, fan, and the stainless mounting brackets. Make reasonable offer. Will try to put pictures in my gallery on CC.

snake oil · #2 (**permalink**) 04-10-2003, 05:32 PM

Is it fitted on a Classic roadster?
Just curious why would you be selling it?
interested
Arcenio

Mike Hausner · #3 (**permalink**) 04-11-2003, 04:31 AM

Good question Arcenio, my original engine was a stock 5.0 with the B303 cam. Before I even got the engine in the chassis I had the 331 stroker motor built. With 10.1:1 compression I was concerned about the cooling capacity of the OEM type rad, so I decided to upgrade to an AFCO racing aluminum rad. BTW the 5.0 is for sale too. Yes, it was fitted to my CR COBRA. This rad is suitable for about 300 hp. MH

snake oil · #4 (**permalink**) 04-11-2003, 09:50 AM

Thank you for your response,
I have a 3.8 turbo now. Aprox 425-450hp
don't know if it would work for me
But thanks just the same.

Mike Hausner · #5 (**permalink**) 04-11-2003, 10:46 AM

Arcenio, I'd be happy to share my design ideas if you need some tips on mounting whatever rad you decide to use. I put a lot of thought into the mounting system to make sure the rad & fan are isolated from road & engine vibration but held securely in place. It sounds like you might need a rad like the I just bought from AFCO Racing ($250 w/shipping). Check 'em out & contact me if you need help on the mounting system.....MH

whdorey · #6 (**permalink**) 07-18-2003, 04:46 AM

Mike any chance you still have the rad and would you ship up to
Ontario. ...Bill