Halibrand rims & tires

rjw_cga · #1 (**permalink**) 09-27-2003, 06:26 PM

HALIBRAND RIMS FOR SALE:
2-15x8 rims with 3" BS
2-15x10 rims with 3.5" BS

Front tires are Michelin 215/60vr/15
Rear tires are Michelin 255/60vr/15
Great tread on all
2-front rotors 11 dia. , 1'' thick
4 spinners , 2 front hubs, 24 pins, 4 centers
Basically everything needed to mount these types of rims.
Please make an offer & be generous as my future rims
& tires depend upon it.
Can email photos.

rjw_cga · #2 (**permalink**) 09-27-2003, 06:41 PM

Click on the camera icon above to see photos.

cobrakit66 · #3 (**permalink**) 09-29-2003, 07:03 AM

rich
give us a ball park figure. this is what my car needs but i know icant swing it right now
ron

Jahred · #4 (**permalink**) 09-29-2003, 08:21 AM

Rich - will this set cross over to most Replica's? With standard bolt patterns? You mention front "hubs" and "rotors" - anything else required for rear? Presume you are including rotors only because you are replacing old ones?

rjw_cga · #5 (**permalink**) 09-29-2003, 09:32 AM

I don't know if the wheels will cross over to most replicas.
My front spindle is 4.5 "long and now I need to buy Granada
rotors to fit my caliper/spindle/ a-frame configuration & it took
me a month to figure out that.
The rear wheels are mounted by the pins which in my car 6
holes were drilled through the rotors then 6 threaded holes
were drilled through the rear axles on a Ford 9 inch.
The rotors are included as they are already pre-drilled/threaded
and it is easier for me to replace them with a rotor with a hub
already such as the granada.