Above ground lifts for sale in NJ

mrmustang · #1 (**permalink**) 10-24-2003, 09:21 AM

Have a friend with a shop, getting rid of four above ground lifts. All less than 4 years old, with little useage. All in excellent condition.

All Rotary/A Dover Units

Two 7,000lb two post lifts $ Asking $1,500 each
One 9,000lb Two post lift Asking $ 1,500
One 12,000lb four post drive on unit Aksing $1,800

All FOB Dover, NJ

Serious inquiries only please.

Pictures on request............

Bill S.

Chaplin · #2 (**permalink**) 10-24-2003, 09:50 AM

Bill-
How tall are these lifts? Do you know how much overhead clearance is necessary? I would be interested in one if it would would fit in my garage without pushing the car through the roof

a pic wouldn't be bad.

Thanks,
Mike

mrmustang · #3 (**permalink**) 10-24-2003, 11:04 AM

Pictures on their way. Picture showing must, with mustang lifted 5.5 feet in the air. Can go higher I'm sure.

Bill S.

dover rotary lifts is the company who produced them. They are not mine, I'm just posting them for a friend.

jamvan · #4 (**permalink**) 10-24-2003, 12:28 PM

Bill:

What is the make of them? There are many types and many models which provide different lift heights. I am currently having two lifts put into my garages and have done a lot of research on this. They are not all made alike.

While the two post lifts are great I have been advised they are really not suitable for most residential applications (flooring support can be an issue. The four post units are great.

I have choose a mfg. named Backyard Buddy which I feel is superior to any of them for a residential use. While they are probably the most expensive (around $3,400 each) others can be found at prices ranging from $1800 - $2500.

Just to let you know.

jim

Chaplin · #5 (**permalink**) 10-24-2003, 12:31 PM

Bill-
Forget it, I'm going to save the $$ and just bring my car over to Jim's house

Jim, you're my new Backyard Buddy

Mike

thorconstr · #6 (**permalink**) 10-24-2003, 12:54 PM

Bill, Could you please call me on my cell (860-790-0140) or email me a # to contact (thorconstr@msn.com) about the lifts? Thanks, Al

mrmustang · #7 (**permalink**) 10-24-2003, 01:19 PM

Al,

You have mail.

Bill S.

mrmustang · #8 (**permalink**) 10-24-2003, 01:26 PM

Jim,

I've seen the backyard buddy..While a nice and simple unit, they do not compare to these commercial grade items. Since I'm not involved with the sale, nor am I making any money off of them, I am staying objective....The company that makes these is the Dover Rotary Lift Company or Dover Industry

Quality pieces, the guy that rents the spot where these are sitting wants to put in a extra large frame machine for bodywork, and the owner of the property wants them sold before he can do so.............

A win, win situation, as Anthony the body shop owner loves to work on plastic cobras, and has done six so far this year that I know about.........

Bill S.

mrmustang · #9 (**permalink**) 10-25-2003, 01:45 PM

More lift details:

The three 2 post lifts are roughly 14 feet high

The four post lift is eleven feet wide
Rotary Lift Co-800-445-5438

Model #'s are as follows:

(2) Rotary 7,000lb Model # SPOA7-200
(1) Rotary 9,000lb Model # SPO9-202
(1) Rotary 12,000lb Model# SM122

Units appear to have been built in 1997

Any other questions, just let me know. Viewings by appointment only Monday through Friday 8am till 5pm, some Saturdays in the am possible...........

Bill S.

Bill Wells · #10 (**permalink**) 10-25-2003, 06:44 PM

mrmustang says these lifts are ROTARY LIFTs :

i have two lifts in my garage, one a ROTARY LIFT 2 post assymetrical. a GREAT lift for those considering these listed here for sale. Check out the new prices and you will see these used are at a considerable savings. I have had NO problems with mine. see : http://rotary-lift.com/

When I bought my Rotary lift they were also the SAME lifts that were sold to Ford dealers by ROTUNDA< except they painted the Rotunda lifts red instead of stock Rotary lift blue and put a Rotunda label on them . Not sure if they are still the Rotunda source or not. They also used to be the supplier for the K-Mart car service center lifts, again, not sure about now.

like other lifts, Rotary is a good brand. FYI> bill

southernfriedcj · #11 (**permalink**) 10-25-2003, 08:20 PM

Bill, you've got mail.

Jim

mrmustang · #12 (**permalink**) 10-26-2003, 04:02 PM

Jim,

You did get my email, right.

Bill S.

ngolm@airinteru · #13 (**permalink**) 10-27-2003, 09:38 AM

I am very interested in your 9000 lbs lift would disassemble and ship to Illinois?

ngolm@airinteru · #14 (**permalink**) 10-27-2003, 09:41 AM

i am the very interested please party Email me at ngolm@airinterus.com your phone number. I currently have a new one on order and can cancel it!

mrmustang · #15 (**permalink**) 10-27-2003, 10:24 AM

You could get a company to come in and remove it, box it up for shipping, but I would have no idea how to ship it????

Bill S.
aka:mrmustang

mrmustang · #16 (**permalink**) 10-27-2003, 11:05 AM

disregard this last one

mrmustang · #17 (**permalink**) 10-27-2003, 01:51 PM

All internal headaches resolved, lifts are back on the market at the prices stated above.

Sincerely,

Bill S.

thorconstr · #18 (**permalink**) 10-27-2003, 03:50 PM

Bill, Could you call me? I'll be up till 8:30 pm, I get up at 4am. 860-790-0140. Thanks, Al

snakebyt · #19 (**permalink**) 10-27-2003, 06:42 PM

Are the 7000lb lifts still available? My cell # is 914 318 0724.

Thanks
Tom

mrmustang · #20 (**permalink**) 10-28-2003, 06:28 AM

Tom,

Yes, both 7,000lb lifts are still for sale. One is still bolted down, and the other is sitting in a corner of the shop. I'll give you a call in a few minutes.

Bill S.