nice toploader on e-bay

rritchey · #1 (**permalink**) 05-28-2004, 09:35 PM

Please check out this auction for a very nice toploader tranny. It is small input, 28 spline output. Don't know if it is close or wide.

rritchey · #2 (**permalink**) 05-28-2004, 09:38 PM

It would probably be good if I put the link, huh?

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT

Tongue Pirate · #3 (**permalink**) 05-28-2004, 10:09 PM

It has the early case.

rritchey · #4 (**permalink**) 05-29-2004, 08:35 AM

It was in a 63 Galaxie when I got it, not sure if that was it's original home or not, just know that's what it was in last.

rritchey · #5 (**permalink**) 05-29-2004, 09:08 PM

I was told by a fellow ebay member to count the teeth on second gear - 28 teeth = close, 31 teeth = wide ratio. I counted the teeth... 28... so I suppose it is close ratio.

Tongue Pirate · #6 (**permalink**) 05-29-2004, 10:12 PM

What's the total length?

rritchey · #7 (**permalink**) 05-30-2004, 04:22 PM

Length = 27 9/16" from face of bellhousing to end of tailshaft (not counting output shaft protrusion) Would be a couple inches more to center of the U-joint. On the front, 6" from end of pilot to face of bellhousing. So total length from tip of pilot to end of output shaft is about 34 1/2"