|
Trigo 5 Pin Wheel Set For ERA - Brand New!
For Sale: Brand new set of Trigo 5 pins to bolt right onto an ERA. Kit is complete with adapters lugs, etc and has never been mounted. Have real Trigo's and the identical correct look for less than 1/2 the cost of 6 pins. $1800.00 complete. Email or reply to post. Thanks,:)
http://www.clubcobra.com/photopost/d...o-array222.jpg http://www.clubcobra.com/photopost/d...25trigo-06.jpg |
15's, 16's or 17's? Backspace?
|
15" diameter. 7.5" wide fronts, 9.5" rears.
Back spacing is 3 3/4" front & rear. Effective backspacing dimension would be reduced by 3/8" due to adapter plate thickness. :) |
I just saw another post on wheel width - I measured my wheels wrong - they are:
8" fronts 10" rears The originally posted dimensions were measured inside of lip to inside of lip, like this: http://www.clubcobra.com/photopost/d...Rims_7_1-2.JPG Instead of the correct way, center of lip to center of lip, like this: http://www.clubcobra.com/photopost/d...16625Rim8a.JPG Sorry for confusion on the width. **) **) |
one last question. what is the inside diameter? I need at least 14 1/4 to clear the Wilwood calipers. My Centerlines taper right where the caliper hits down to 14 and bind. A spacer works, but I would like to put on the correct wheels and will buy yours if there is enough room for these brakes.
thanks. Matt |
BTW, Vintage sells that same set for $1695 and will throw in the lead hammer...
|
Mzhun - I will get back to you on the clearance. I will measure it tonight.
As for Vintage, those are Vintage wheels, not real Trigos. The Trigo set sells today for $2000.00 - they were $2400.00. :) |
Quote:
Let me know if you want a pic. Thanks, :) |
Perfect. I am guessing that they will fit the standard 4 1/4 Ford bolt pattern.
Will you take 1500 plus shipping? |
Here is a pic of the 14.5" inside diameter.
http://www.clubcobra.com/photopost/d...-2_inside_.JPG And here is the pic of the 4.25" bolt patttern. Note the wheels are also drilled for 4.5" centers as well. http://www.clubcobra.com/photopost/d...1-4_center.JPG Let's call it $1650 plus shipping and we have a deal. :) :) |
They are 7.5" and 9.5" wide. You measure wheel width on the inside of the bead, not the outer edges.
|
Quote:
Trigo calls them 7.5" and 9.5". http://www.trigowheels.com/adaptor.html Thanks, :) :) |
They are measured where the tire touches the lip, as it is the only way to have a consistant measurement due to varying lip thicknesses.
Bump for you, their great wheels, and I have never regretted for a second buying either set of mine. |
Thanks for the pic. It looks like they taper toward the center like my current wheels. What is the diameter closer to the center? The pic may be deceiving but I have to be sure, thanks!
|
BTW, Deal! I will buy them.
|
There is a slight taper - at the hub it measures exactly 14". Let me know if you want to proceed. :)
|
There is a slight taper - at the hub it measures exactly 14". Let me know if you want to proceed. :)
|
Bruce, sorry I have not called you back yet but I have been put in rather exigent circumstances at work and am traveling through the weekend.
Matt |
hmm...exigent - I got my grammar lesson today - lol.
BTW - I called Trigo and spoke with Lynn Park about the clearance question - he told me the taper and clearance is the same for all 15" Trigos and they will fit with 12" Wilwood brakes - he even has that exact same setup on his own car. :) :) |
Bolt Circle measurement
Hi Luke
What you have there is actually a 4.5 and 4.75 bolt circle adapter. To calculate the bolt circle on a 5 lug you measure from the center of #1 stud to the outside of #3 (not the center) Bob Lacey Vintage Wheels |
| All times are GMT -7. The time now is 05:00 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: