Need Help With Wheels

tchrome · #1 (**permalink**) 11-23-2006, 12:04 PM

I HAVE A SET OF VINTAGE 15" WHEELS, I AM HAVING A PROBLEM WITH MY TIRES STICKING OUT OT THE WHEEL FLAIRS. I HAVE AN NAF CAR AND I AM RUNNING 295x50X15'S ON REAR AND 235X60X15'S ON THE FRONT. IS THERE ANOTHER COMAPNY THAT OFFERS A WHEEL WITH A LESSOR OFFSET. I NEED TO BRING WHEEL IN A BIT. ANY SUGGESTIONS? THANKS FOR ANY HELP..YOU CAN EMAIL ME DIRECT AT TCHROME@AOL.COM.

TONY

496fe · #2 (**permalink**) 11-23-2006, 01:12 PM

There is a company here that will do anything you want to your Vintage Wheels. They added 2"" to the front side and took 3/4" off the back side. Reasonable prices too. Problem is that he is similar to PSE in that he's hard to contact... you need to be patient. He is gold though. Made mine ezacly how I wanted them.

Good Luck.

Vaughn Engineering
626 358-6413

tchrome · #3 (**permalink**) 11-23-2006, 05:30 PM

So You Were Trying To Get Your Wheels Out Further In The Front? And 3/4 " In Ward In The Rear? I Need At Least 1 1/2 " Off The Rear And I" Off The Front To Bring All The Wheels Inward. Thanks So Much For Your Input And Quick Response. I Will Call Hiom.

Best Regards,
Tony

496fe · #4 (**permalink**) 11-23-2006, 05:58 PM

No, these two mods were on the rear wheels only!

Actually, in the front, I moved the control arm mounts inwards. It was a lot of work, but I too don't like the wheels sticking out.

Another option is Compomotive, where you can build any size and offset you want by mixing innner, outer, and center pieces.